Industry standard pinout for seamless integration into existing systems

High conversion efficiency up to92% to reduce power loss

Wide input voltage range (8.3~14VDC) compatible with 12V power supplies

Flexible output voltage options (0.75~5.0VDC) with max output current of5A (up to25W)

Built-in protections: over-temperature (120°C trigger), continuous short circuit, and input under-voltage lockout

Remote on/off function with positive/negative logic support

Cost-efficient open frame design for space optimization

UL/C-UL60950-1 certified to meet global safety standards

Low output ripple and noise (max75mVp-p) for stable component performance

Adjustable output voltage via external trim resistor (default to0.75V when open)

Fast transient response (200mV deviation for50% load step) to handle dynamic loads

Unconditional stability with up to3000µF low ESR output capacitance

Long MTBF (1.5 million hours at25°C) for reliable long-term operation

Compact size (22.9x10.16x5.6mm) and light weight (2.3g) for space-constrained applications

Wide operating temperature range (-40~85°C) suitable for harsh environments

Industrial control systems: Powering microcontrollers, sensors, and actuators in factory automation

Telecom infrastructure: Routers, switches, and optical network terminals (ONTs) needing low-voltage supplies

Data center equipment: Servers and storage arrays for CPU/memory power conversion

Embedded systems: Single-board computers (SBCs), IoT gateways, and industrial PCs

Test and measurement devices: Oscilloscopes, signal generators, and power meters

Consumer electronics: High-performance gaming devices and home theater systems

Medical devices: Non-life support diagnostic tools and monitoring equipment

Automotive infotainment: In-car GPS and entertainment systems

Renewable energy: Solar inverters and battery management systems (BMS)

Commercial office equipment: Printers, scanners, and multi-function devices

Automation: PLCs and robotic arm control systems

Security systems: CCTV cameras and access control panels

Input capacitors should be low ESR (avoid electrolytic) and placed close to input pins

Output voltage adjustment: Use external trim resistor (0.75~5.0V); open trim pin defaults to 0.75V

Remote on/off logic: Positive (default) – high/floating=on, low=off; Negative (suffix N) – low/floating=on, high=off

Max output capacitance: Up to3000µF (low ESR) to ensure stability

Non-isolated design: Input and output share common ground (use low-impedance ground planes)

Operating temp range: -40°C~85°C; storage temp: -55°C~125°C

Not recommended for life support systems (per warranty terms)

Follow recommended application circuits for trim adjustment and remote control

Well-ventilated environments are needed for efficient heat dissipation

UL certification applies to specific conditions (refer to official datasheet)

Guarantee is 2 years, excluding critical applications where failure could cause harm

VPOL5A-12-SIP-PDF数据手册-参考资料