1 Isolated output design ensures electrical separation between input and output circuits

2 High power density up to 50W per cubic inch, ideal for space-constrained applications

3 Certified by UL, CULus, and CE for global compliance

4 Energy efficiency up to 90%, reducing power loss and heat generation

5 Compact half-brick form factor: 2.28 inches × 2.44 inches × 0.5 inches (57.9mm ×61.9mm ×12.7mm)

6 Equipped with remote sense function to compensate for output lead resistance and maintain voltage accuracy

7 Built-in current limit protection to prevent damage from overloading

8 Logic disable feature allows for easy on/off control of the converter

9 Wide output voltage adjustment range to meet diverse system requirements

10 Utilizes zero-current switching (ZCS) forward converter technology for low noise and high reliability

11 Low noise frequency modulation (FM) control minimizes electromagnetic interference

12 RoHS compliant for VE series versions, adhering to environmental standards

13 Proven reliability with over 8 million units installed globally

14 Operates at temperatures up to 100°C, suitable for harsh industrial environments

1 Component-level DC-DC conversion in industrial control systems

2 Power supply for telecom and networking equipment like routers, switches, and base stations

3 Embedded systems requiring compact, efficient power modules

4 Test and measurement devices where precise voltage regulation is needed

5 Automation equipment in manufacturing lines

6 Portable industrial tools and devices with limited space

7 Data center hardware components needing high-density power solutions

8 Non-critical medical equipment (excluding life support systems without Vicor’s written approval)

9 Power systems for automotive electronics (where operating temp and efficiency are key)

10 Consumer electronics with demanding power requirements, such as high-end audio devices

1 Store the converter in ESD-safe packaging when not installed, following ANSI/ESD S20.20 standards

2 Operating temperature range varies by grade: E (-10°C to 100°C), C (-25°C to100°C), I (-40°C to100°C), M (-55°C to100°C)

3 Do not exceed the permissible load current during normal or abnormal operations

4 For dynamic loads exceeding 25% of rated current, consult Vicor Applications Engineering to ensure proper operation

5 Use remote sense function to offset voltage drops caused by output lead impedance

6 Adhere to the specified maximum output capacitance limits as outlined in the product specifications

7 This converter does not include overcurrent protection in booster modules

8 Do not use in critical life support devices or systems without explicit written approval from Vicor’s CEO and General Counsel

9 Handle the device with proper ESD protection to avoid damage

10 Refer to Vicor’s official website for the latest product specifications, as they are subject to change without notice

11 Follow all safety guidelines and installation instructions provided in the product manual

VI-J7L-IY-F2-PDF数据手册-参考资料