产品特点 FEATURES

1 Brand: VICOR, model: V48C48M150BL, belonging to 48V Micro Family DC-DC converter module

2 Input voltage range: 36-75VDC; input surge withstand: up to 100VDC for less than 100ms

3 Output specs: 48V nominal voltage, 150W rated power; programmable output range: 10-110% of nominal

4 M-grade temperature range: operating temperature -55 to +100°C, storage temperature -65 to +125°C

5 Isolation voltages: IN to OUT:3000VRMS, IN to baseplate:1500VRMS, OUT to baseplate:500VRMS

6 Efficiency: minimum 87%, typical 88.4% (under nominal input, 75% load, 25°C)

7 Key features: parallelable with N+M fault tolerance, low-noise ZCS/ZVS architecture, RoHS compliant (with F/G pin options)

8 Agency approvals: cURus, cTÜVus, CE (compliant with UL60950-1, EN60950-1 etc.)

9 Power density up to 90W per cubic inch

10 Regulation: ±0.5% from no load to full load

使用场景 APPLICATIONS

1 Distributed power systems in industrial control equipment

2 Automatic Test Equipment (ATE) for electronic component testing

3 Communication equipment such as telecom base stations and network devices

4 Point-of-load power regulation in various electronic systems

5 High-reliability applications requiring wide temperature range adaptation

注意事项 PRECAUTIONS

1 Do not exceed the permissible load current under normal, abnormal or test conditions

2 For dynamic loading exceeding 25% of rated current, consult Vicor Applications Engineering in advance

3 Audible noise may occur under dynamic, light or no-load conditions

4 When using remote sense, protect leads against reversal, noise pickup, open circuit or excessive resistance; compensation circuitry may be needed for phase lag

5 Use fast-acting electronic circuit breaker if the load may exceed rated current; never exceed the rated current

6 Do not exceed the maximum output capacitance (refer to the Maxi, Mini, Micro Design Guide)

7 Store the module in ESD-safe packaging within 15-38°C and non-condensing humidity environment

8 Follow the recommended soldering methods and procedures (refer to the Maxi, Mini, Micro Design Guide)

9 For parallel operation of more than 3 modules, use transformer-coupled interface or PR buffer circuit (refer to the design guide)

V48C48M150BL-PDF数据手册-参考资料