1 Brand: VICOR, Model: V48C12M150BF

2 Input voltage range: 36-75VDC, input surge withstand:100VDC for ≤100ms

3 Output voltage:12V, output power:150W

4 Operating temperature range (M grade):-55°C to +100°C, storage temperature range:-65°C to +125°C

5 Pin style: Short RoHS (F), Gold finish, RoHS compliant

6 Physical size:2.28x1.45x0.5 inches (57.9x36.8x12.7mm)

7 High efficiency: Up to 89% (nominal input,75% load,25°C)

8 Isolated output, low-noise ZCS/ZVS switching architecture

9 Output voltage programmable:10-110% of nominal (trimming below90% may need 10% minimum load)

10 Regulation:±0.5% (no load to full load), ±0.2% line regulation, ±0.005%/°C temperature regulation

11 Parallelable with N+M fault tolerance (supports current sharing)

12 Agency approvals: cURus, cTÜVus, CE (complying with UL60950-1 etc. with input fuse)

13 Thermal resistance: Baseplate to sink (flat/greased:0.24°C/W; thermal pad:0.21°C/W)

14 Mounting torque:5 in.lbs (0.57 N.m) for 6 points

1 Distributed power systems in electronic equipment

2 Non-life support medical equipment (life support needs Vicor approval)

3 Automatic Test Equipment (ATE) for component testing

4 Telecom infrastructure (base stations, network devices)

5 Industrial automation systems (control panels, sensors)

6 High-density power conversion in compact enclosures

7 Redundant power arrays for reliable operations

8 Point-of-load regulation in complex circuits

1 Do not exceed permissible load current under any conditions

2 Dynamic loading over25% of rated current needs Vicor's review

3 Audible noise may occur under dynamic/light/no load

4 Remote sense applications may need compensation circuitry

5 Protect remote-sense leads from reversal, noise or excessive resistance

6 Use fast-acting circuit breaker if load may exceed rated current

7 Do not test current limit/short circuit (damages converter)

8 Output capacitance must not exceed design guide limits

9 For parallel operation of 4+ converters, use transformer-coupled interface

10 Store in ESD-safe packaging at15-38°C with non-condensing humidity

11 Follow soldering guidelines: wave solder (260°C ≤5sec), hand solder (390°C ≤7sec)

12 Life support use requires Vicor's prior written approval

V48C12M150BF-PDF数据手册-参考资料