DC input range:18–36V, input surge withstand up to50V for100ms

1 Isolated output with DC output options from3.3V to48V; programmable output range of10–110% of nominal

2 High regulation:±0.25% from no load to full load, ±0.20% max line regulation, ±0.005%/°C max temperature regulation

3 Up to88% efficiency and99W per cubic inch power density; full load operation at100°C

4 Parallelable with N+M fault tolerance, low-noise ZCS/ZVS architecture

5 RoHS compliant (with F/G pin options); compact size:4.6×2.2×0.5 inches (117×56×12.7mm), height above board:0.43 inches (10.9mm)

6 Supports remote sense (total drop ≤0.5V); module alarm via PC/SC pins (indicates UV, OV, OT, internal faults)

7 Various pin styles available: short/long, tin/lead/gold/RoHS compliant (F/G/K options)

8 High isolation:IN to OUT3000VRMS, IN to baseplate1500VRMS, OUT to baseplate500VRMS

9 Current sharing accuracy ±5% max for parallel arrays

Industrial and process control systems

1 Distributed power systems requiring efficient high-density conversion

2 Medical equipment and Automatic Test Equipment (ATE)

3 Communications systems needing reliable power supplies

4 Power arrays for increased power with N+1 redundancy

5 Applications demanding low-noise conversion and high regulation

6 Systems requiring programmable output and remote monitoring

7 Environments needing RoHS-compliant components and ESD-safe handling

1 Do not exceed permissible load current under any conditions (normal/abnormal/test)

2 For dynamic loading over25% of rated current, consult Vicor Applications Engineering

3 Output trimming: Trim down reduces available power proportionally; trim up reduces max current proportionally

4 Do not trim output above +10% of nominal (risk of OVP activation)

5 Parallel operation: Use AC-coupled interface (≤3 modules) or transformer-coupled (≥4 modules)

6 Store in ESD-safe packaging (ANSI/ESD S20.20) at15–38°C with non-condensing humidity

7 Follow soldering guidelines: Wave solder ≤260°C (<5sec), hand solder ≤390°C (<7sec)

8 Remote sense leads must connect to respective output terminals; route close together to minimize noise

9 If fault occurs (PC pin low), module auto-restarts periodically; do not operate above100°C

10 Refer to Maxi/Mini/Micro Design Guide for detailed application instructions

V24C8E100BL-PDF数据手册-参考资料