V24C24H50BN DC-DC Converter Module (Maxi Family) Key Features:

1 DC input voltage range:18-36V

2 Isolated output with nominal 24V and 500W power rating

3 Input surge withstand capability:50V for100ms

4 Programmable output voltage range:10-110% of nominal value

5 High regulation accuracy: ±0.25% from no-load to full-load

6 Efficient operation: Up to87.8% efficiency (nominal input,75% load,25°C)

7 Wide operating temperature range: Full load at up to100°C

8 High power density: Up to99W per cubic inch

9 Parallelable design: Supports N+M fault tolerance for redundant power systems

10 Low-noise performance: Adopts ZCS/ZVS architecture to minimize EMI

11 RoHS compliant (with F/G pin option)

12 Compact dimensions:4.6x2.2x0.5 inches (117x56x12.7mm)

Applicable to the following fields:

1 Industrial and process control systems

2 Distributed power supply systems

3 Medical equipment (complying with relevant standards)

4 Automatic Test Equipment (ATE)

5 Non-defense communications infrastructure

6 Industrial automation equipment

7 Embedded system power supplies

8 Telecom equipment power modules

Important precautions for use:

1 Do not exceed the permissible load current under any conditions (normal, abnormal, test)

2 For dynamic loading exceeding25% of rated current, consult Vicor Applications Engineering

3 Under dynamic/light/no-load conditions, audible noise may occur; remote sense may require compensation circuitry

4 Protect remote sense leads against reversal, noise, open circuit, or excessive resistance

5 Use fast-acting electronic circuit breaker if load may exceed rated current; never exceed rated current

6 Do not exceed maximum output capacitance specified in the Maxi, Mini, Micro Design Guide

7 Output voltage trimming guidelines:

8 Trim down: Reduce available power by same percentage as voltage trim-down

9 Trim up: Reduce max output current by same percentage as voltage increase; do not trim above +10% of nominal

10 Parallel operation: Use modules of same input/output voltage and power level; refer to design guide for interface details

11 Storage: Keep in ESD-safe packaging (ANSI/ESD S20.20 compliant) at15-38°C with no condensing humidity

12 Follow PCB mounting specs and design guide for recommended soldering methods

V24C24H50BN-PDF数据手册-参考资料