产品特点 FEATURES

VICOR V24C12H150BS DC-DC Converter Module (24V Maxi Family) features:

1 DC input voltage range:18-36V, input surge withstand capability of50V for100ms

2 Isolated output with nominal 12V voltage, programmable from10% to110% of nominal value

3 High regulation accuracy: ±0.25% from no-load to full-load

4 Efficiency up to88%, power density up to99W per cubic inch

5 Wide operating temperature: full-load operation at 100°C; H-grade (-40°C to +100°C operating, -55°C to +125°C storage)

6 Low-noise ZCS/ZVS architecture

7 Parallelable with N+M fault tolerance for increased power and redundancy

8 Compact size: height above board 0.43in (10.9mm), overall size4.6x2.2x0.5in (117x56x12.7mm)

9 RoHS compliant (with F/G pin option)

10 Remote sense support (max total drop0.5V, 0.25V per leg)

11 Built-in protection: input undervoltage/overvoltage, overtemperature, and fault alarm

使用场景 APPLICATIONS

1 Industrial and process control systems: power sensors, actuators, control units in factory automation

2 Distributed power systems: telecom base stations, data centers for stable 12V power distribution

3 Automatic Test Equipment (ATE): reliable power for test instruments and measurement devices

4 Non-life support medical equipment: diagnostic tools, laboratory devices (life support use requires Vicor approval)

5 Rugged electronic systems: applications needing surge resistance and wide temperature tolerance

6 Parallel power arrays: critical systems requiring higher power output and N+M redundancy

注意事项 PRECAUTIONS

1 Do not exceed permissible load current under any conditions; dynamic loading over25% of rated current needs Vicor's review

2 Audible noise under dynamic/light/no-load conditions is normal

3 Protect remote sense leads against reversal, noise, open circuit, or excessive resistance

4 Trim voltage rules: trim down reduces available power proportionally; trim up reduces max current proportionally and avoid exceeding +10% of nominal

5 Parallel operation requires same input/output voltage/power modules with proper PR pin interface

6 Store in ESD-safe packaging (ANSI/ESD S20.20) at15-38°C non-condensing humidity

7 Follow Maxi/Mini/Micro Design Guide for soldering methods

8 Life support device use is prohibited without Vicor's prior written approval

V24C12H150BS-PDF数据手册-参考资料