1 Brand: Vicor, Model: V24B5E150BL (24V Mini Family DC-DC converter module)

2 DC input range:18-36V; input surge withstand:50V for 100ms

3 Isolated output:5V DC, rated power150W

4 Programmable output voltage:10-110% of nominal

5 High regulation accuracy: ±0.5% (no load to full load), ±0.02% line regulation, ±0.002%/°C temperature regulation

6 Efficiency: Up to84.8% (nominal input,75% load)

7 Compact design: Power density up to80W per cubic inch; height above board:0.43in (10.9mm)

8 Robust performance: Max operating temp100°C (full load); E grade storage temp:-20 to+125°C

9 Parallelable: Supports N+M fault tolerance for redundant systems

10 Low noise: ZCS/ZVS architecture minimizes electromagnetic interference

11 RoHS compliant (with F/G pin option)

12 Isolation: IN to OUT test voltage3000VRMS, IN to base1500VRMS, OUT to base500VRMS

1 Industrial and process control systems: Stable power for sensors, actuators and control circuits

2 Distributed power systems: Intermediate bus architecture (IBA) in industrial equipment

3 Automatic Test Equipment (ATE): Precise voltage for test instruments

4 Communication equipment: Reliable power for routers, switches and base stations

5 Non-life-support medical devices: Consistent power for diagnostic/treatment equipment (per Vicor policy)

1 Do not exceed rated output current (30A) under any conditions

2 For dynamic loads over25% of rated current, consult Vicor Applications Engineering

3 Audible noise may occur under dynamic/light/no load

4 Protect remote sense leads against reversal, noise, open circuit or excessive resistance

5 Use fast-acting circuit breaker if load may exceed rated current

6 Do not exceed max output capacitance specified in design guide

7 Trim down: Reduce output power proportionally to voltage trim-down; avoid overcurrent

8 Trim up: Reduce max output current proportionally to voltage trim-up; do not exceed +10% of nominal

9 Parallel operation: Only same input/output/power modules; follow PR pin interface rules (AC-coupled for ≤3 modules)

10 Soldering: Follow design guide procedures; wave solder ≤260°C (<5sec), hand solder ≤390°C (<7sec)

11 Storage: Keep in ESD-safe packaging; E grade storage temp:-20 to+125°C

V24B5E150BL-PDF数据手册-参考资料