产品特点 FEATURES

1 Brand: OMRON (欧姆龙), model: SS-01GL1373-FT, belonging to the SS series subminiature basic switches.

2 High reliability and security: Designed with two split springs to ensure stability and durability, supporting up to 30,000 mechanical operations and 10,000 electrical operations (0.1A, 30VDC).

3 Subminiature size: Suitable for compact installation spaces in various electronic devices.

4 Actuator type: Simulated roller lever (GL13), providing smooth contact actuation ideal for position detection.

5 Ratings: 30 VDC, 0.1 A (consistent with SS-01 series specifications).

6 Contact material: Silver, ensuring good electrical conductivity.

7 Safety compliance: RoHS compliant, meeting UL and CSA safety standards.

8 Operating temperature range: -25°C to 85°C (standard model), adapting to most indoor and general industrial environments.

使用场景 APPLICATIONS

1 Compact home appliances: Position detection in small coffee makers, toasters, or electric kettles (e.g., lid open/close sensing).

2 Office equipment: Paper jam detection in printers, scanner cover position sensing, or copier tray status detection.

3 Industrial automation: Limit position detection in small robotic arms, conveyor belt systems, or precision machinery components.

4 Consumer electronics: Mode switching in portable cameras, audio device button actuation, or wearable device position sensing.

5 Automotive interior components: Power window mechanism position detection, seat adjustment limit sensing (for compact automotive electronics).

6 Medical devices: Position sensing in small diagnostic equipment or portable medical tools (relying on high reliability).

注意事项 PRECAUTIONS

1 Soldering guidelines:

2 Use iron tip temperature below 350°C, complete soldering within 5 seconds, and avoid external force for 1 minute after soldering.

3 Apply minimal flux; excess flux may enter the switch and cause contact failures.

4 PCB terminal models: Avoid solder baths; use manual soldering to prevent flux permeation.

5 Mounting instructions:

6 Use M2.3 screws with washers, tighten to 0.23-0.26 Nm torque.

7 Mount on flat surfaces to avoid housing deformation or faulty operation.

8 Micro load usage: Insert contact protection circuits if using micro loads to extend service life.

9 General: Do not apply excessive force to the actuator; avoid harsh environments (extreme temps, dust, corrosive gases).

SS-01GL1373-FT-PDF数据手册-参考资料