1 Compact general-purpose horizontal enclosed switch from OMRON SHL series

2 Certified by EN, UL, CSA, and CCC standards

3 Equipped with durable coil spring in tough high-precision case

4 IP67 degree of protection against dust and water

5 Terminal protective cover can be switched left or right for flexible wiring

6 Molded terminal with VCTF cable (2m length, 0.75mm² cross-section, 3 conductors: COM black, NC white, NO red)

7 Actuator type: Short hinge roller lever

8 Mechanical durability up to 500,000 operations; electrical durability up to 100,000 operations (resistive load)

9 Operating specs: OF max 3.2N, RF min 0.78N, PT max2.8mm, OT min0.5mm, MD max2.3mm, FP max32.5mm, OP max21.5±1mm

10 Suitable for microload applications

11 Uses single basic switch for strength requirements

1 Industrial automation lines (conveyor belts, packaging machines, assembly equipment) for position or limit detection

2 Machinery requiring compact size and robust construction

3 Dust-prone or wet environments (IP67 protection)

4 Low current/voltage microload circuit applications

5 Panel mounting or horizontal installation setups

6 General-purpose switching tasks in manufacturing or processing industries

1 Avoid outdoor exposure to direct sunlight, rain, oil drops, or moisture without proper protection

2 Prevent actuator/switch contact with cutting chips, dust, or dirt

3 Do not expose to excessive vibration/shock to avoid failure

4 Keep away from silicon gas environments (may cause contact issues)

5 Use fuse with breaking current 1.5-2x switch rated current when connecting

6 Mount with M4 screws/washers; torque terminal screws to1.18-1.37N·m, mounting screws to0.24-0.34N·m

7 For microload use, ensure operation within specified range

8 Do not use silicon grease/products near switch if silicon gas is present

9 Follow correct wiring: COM(black), NC(white), NO(red) terminals

10 Refer to OMRON safety precautions for full details

SHL-W255-MR VCTF 2M-PDF数据手册-参考资料