产品特点 FEATURES

1 Brand: Anderson Power (APP), part of IDEAL Company

2 Series: Mid Power SPEC Pak, sealed power connection solution

3 Environmental Protection: IP68 rated sealing (dust tight and water resistant up to 1m depth), chemical and UV resistant ruggedized shells (PC/PBT material)

4 Contact Configuration: Supports up to 4 Powerpole power contacts (silver-plated, 80A at 600V) and up to 8 auxiliary contacts (gold-plated,5A at600V) for signal/sequencing

5 Wire Compatibility: Power contacts accept12-6 AWG (3.3-13.3 mm²), auxiliary contacts accept24-12 AWG (0.5-5.3 mm²)

6 Mechanical Design: Stainless steel latches to prevent accidental unmating; color-coded Powerpole housings to match wire colors; touch safe (compliant with UL60529)

7 Temperature Range: Operating temp from -40°C to105°C (-40°F to221°F)

8 Durability:1500 mating cycles (no load) for silver-plated contacts; crush test (EIA364-40B) passed; drop test (UL60950) passed

9 Materials: Shell/housing (PC/PBT, flame retardant V0), latch (stainless steel), contacts (copper alloy with silver/gold plating)

使用场景 APPLICATIONS

1 Outdoor Renewable Energy: Solar power system connections (panel to inverter, battery banks)

2 Marine Applications: Wiring for boats, yachts, or offshore equipment (resistant to saltwater and humidity)

3 Industrial Automation: Machine tool wiring, motor connections, and control systems in dusty/wet environments

4 Wind Power: Turbine generator and control panel connections

5 Transportation: Vehicle wiring (EV charging, commercial vehicles) and ground support equipment

6 Harsh Environment Pumps: Water pump systems in construction sites or agricultural fields

7 Lighting Systems: Outdoor LED lighting installations (street lights, stadium lights)

8 Other: Any application requiring sealed, reliable power/signal connections in harsh conditions (dust, water, chemicals)

注意事项 PRECAUTIONS

1 Installation: Use recommended hardware (M3.5x15mm screws) with torque7-10 in-lbs; ensure cable gland is properly tightened (hand tighten then add3/4 turn for6 AWG,1/2 turn for others) to maintain IP68 seal

2 Wire Selection: Match wire gauge to contact type (power vs auxiliary) to avoid overheating

3 Storage: Keep unused connectors in dry, cool environments to prevent damage to sealing components

4 Maintenance: Avoid exceeding mating cycle limits (1500) to ensure contact reliability; inspect seals regularly for wear or damage

5 Safety: Ensure power is disconnected before mating/unmating; follow UL/EIA standards for proper installation

6 Accessories: Cable glands are sold separately; select appropriate gland based on wire diameter and number of wires

7 Latching: Confirm the stainless steel latch is fully engaged to prevent accidental disconnection in vibration-prone environments

PM16P12S30-PDF数据手册-参考资料