产品特点 FEATURES

1 Brand: MW (Meanwell), model: NMP1K2-KKKHEC-06 (1200W modular power supply with 6 slots)

2 Input specs: 90~264VAC or 120~370VDC input, 47~63Hz frequency; PF>0.95@230VAC full load

3 Output modules: Single output (NMS-240:5V/36A,12V/20A,24V/10A,48V/5A; each up to240W) and dual output (NMD-240: dual30V/5A, combined240W max)

4 Efficiency: Up to91% (full case load with H/K modules at24V/48V)

5 Protection functions: Overload (constant current limiting), Overvoltage (shutdown, re-power to recover), Over-temperature (shutdown, auto recover after cooling)

6 Control functions: Global/local ON/OFF, remote sense (compensate up to0.5V voltage drop), output voltage/current programming (PV/PC pins), DC OK signal (TTL level), current sharing (parallel operation), T-Alarm (over temp signal)

7 Safety standards: Complies with ANSI/AAMI ES60601-1 Ed3.1, UL62368-1, TUV EN60601-1 Ed3.1, EN62368-1, IEC60601-1 Ed3.1, IEC62368-1, EAC TP TC004

8 Mechanical specs: NMP1K2 size250*127*41mm, weight ~2kg; modules size118.5*37.9*18mm

9 EMC compliance: EN55032/CISPR32, EN55011/CISPR11, EN61000-3-2/3, EN61000-4-2/3/4/5/6/8/11

使用场景 APPLICATIONS

1 Medical equipment: Diagnostic devices, patient monitors, lab instruments (meets medical safety standards)

2 Industrial automation: PLCs, control panels, robotic systems

3 Test & measurement: Oscilloscopes, power analyzers, lab testing setups

4 Data communication: Servers, network switches, telecom equipment

5 Industrial IoT: Multi-voltage device powering, remote-controlled systems

6 Laboratory applications: Flexible power supply for various experimental devices

注意事项 PRECAUTIONS

1 Global ON/OFF: Ensure shorting connector (RC1 to GND-P) is assembled; otherwise, no output.

2 Remote sense: Use twisted pairs for sense lines; compensates up to0.5V voltage drop.

3 Local ON/OFF: For NMS-240: Short RC2 to GND (ON), open (OFF); For NMD-240: Short RC2 to GND1 (V1 ON), RC3 to GND2 (V2 ON).

4 Parallel operation: Connect CS pins of modules; output voltage difference <0.2V; max6 modules for NMP1K2; remote control must sync all modules; PC function not allowed in parallel.

5 Derating: When output voltage <12V and ambient temp-15~-30°C: derate output current to90% of rated.

6 Over-temperature: Output shuts down, auto recovers when internal temp drops to safe level.

7 Overvoltage: Output shuts down; re-power the unit to recover.

8 Wiring: For parallel setups, use short, large-diameter wires to connect modules first then to load.

NMP1K2-KKKHEC-06-PDF数据手册-参考资料