产品特点 FEATURES

1 Modular design with 6 slots (NMP1K2 model) supporting up to 1200W total output power, compatible with NMS-240 single-output and NMD-240 dual-output modules

2 Wide input voltage range: 90~264VAC or 120~370VDC, suitable for global applications

3 High efficiency up to 91% (typical) at full load with H/K modules (24V/48V nominal), reducing energy consumption

4 Compliance with multiple safety standards: IEC60601-1 (medical, 2x MOPP isolation), IEC62368-1 (ITE), ensuring reliability in diverse scenarios

5 Comprehensive protection functions: overvoltage (OVP), overcurrent (OCP), overtemperature (OTP), overload (OLP) protection; shutdown and auto-recovery or re-power recovery modes

6 Support for remote control: global/local ON/OFF, remote sense (compensates wiring voltage drop up to 0.5V), DC OK signal (TTL level indicating output status)

7 Current sharing capability for parallel operation of NMS-240 modules, ensuring balanced load distribution

8 Auxiliary power output: 5V/2A (front-end) and 5V/10mA (module-level), facilitating external control circuits

9 Compact dimensions: 250×127×41mm (L×W×H), saving installation space

使用场景 APPLICATIONS

1 Medical equipment: Suitable for devices requiring medical safety compliance (e.g., diagnostic instruments, patient monitoring systems)

2 Industrial automation: Power supply for PLCs, DCS systems, servo drives, and sensor networks in manufacturing lines

3 Communication systems: Backup or primary power for routers, switches, base stations, and data transmission equipment

4 Test and measurement: Stable power for lab instruments, electronic testing devices, and calibration tools

5 Data centers: Modular power solution for server racks, storage systems, and network infrastructure

6 Industrial control panels: Provides multiple regulated outputs for various components in control cabinets

7 Renewable energy systems: Integration with solar or wind power systems requiring wide input voltage range

注意事项 PRECAUTIONS

1 Installation: Ensure proper grounding (FG terminal) to prevent electric shock; maintain sufficient ventilation around the device to avoid overheating (follow air flow direction indicated)

2 Module compatibility: Only use compatible NMS-240/NMD-240 modules; check slot assignment and configuration codes (00~31 for NMP1K2) before installation

3 Operation: Do not exceed the maximum total output power (1200W); for parallel operation of modules, ensure output voltage difference between modules is less than 0.2V and connect CS pins properly

4 Remote control: For local ON/OFF of modules, set RC2/RC3 pins correctly (open for ON, short for OFF); for global control, use RC1 pin (short for ON, open for OFF)

5 Maintenance: Disconnect power before cleaning or servicing; keep the device away from moisture, dust, and corrosive environments; regularly check for loose connections and overheating components

6 Safety: Avoid touching live parts when the device is powered on; use insulated tools during installation; follow local electrical safety regulations

NMP1K2-KKKCHH-02-PDF数据手册-参考资料