产品特点 FEATURES

1 Modular power supply from MW (Meanwell), model NMP1K2-KKK#CC-00, part of NMP series with 6 slots and 1200W maximum total power

2 Supports single output modules (NMS-240) with options:5V@36A,12V@20A,24V@10A,48V@5A; each module has adjustable voltage range (e.g.,48V module:30-55V) and up to240W power

3 Wide input range:90-264VAC or120-370VDC; frequency47-63Hz; high power factor (PF>0.95@230VAC full load) and efficiency up to91% (full load with24V/48V modules)

4 Safety compliance: Meets medical (2x MOPP between primary and secondary) and ITE standards; earth leakage current <400uA/264VAC

5 Rich protection features: Overload (constant current limiting), overvoltage (shutdown, re-power to recover), overtemperature (auto-recover after cooling) protection

6 Functionalities: Remote sense (compensates up to0.5V voltage drop), remote on/off (open=ON, short=OFF), DC OK signal (TTL level), current sharing (for parallel operation), voltage/current programming (PV/PC pins)

注意事项 PRECAUTIONS

1 Installation: Use recommended screws (M4 for front-end, M3.5 for modules) with specified torque (12Kgf-cm for AC terminal,10Kgf-cm for DC terminal); ensure proper grounding

2 Operation: Do not exceed total power (1200W for NMP1K2); for parallel operation, connect CS pins of modules, ensure voltage difference <0.2V between modules, max6 modules in parallel

3 Derating: When output voltage <12V and ambient temp-15~-30°C, derate output current to90% of rated value; derate power according to temp curve above50°C

4 Protection: Overtemperature protection auto-recovers after cooling; overvoltage/overload protection requires re-powering to recover

5 Wiring: Use appropriate wire gauge for current; twist sense lines for remote sense to minimize noise; avoid wire overloading

6 Environment: Operate within-30~+70°C temp range and20-90% RH non-condensing; avoid condensation and dust accumulation

NMP1K2-KKK#CC-00-PDF数据手册-参考资料