产品特点 FEATURES

1 Brand: MW (Meanwell), Model: NMP1K2-KKHHKE-01

2 Modular design with 6 slots, supporting up to 1200W total output power

3 Wide input voltage range:90~264VAC or120~370VDC, frequency range:47~63Hz

4 High efficiency up to91% (full load with H/K module at24V/48V nominal voltage)

5 Compliance with multiple safety standards: IEC60601-1 (medical,2x MOPP isolation), IEC62368-1 (ITE), etc.

6 Supports multiple output modules: single output (NMS-240 series:5V/36A,12V/20A,24V/10A,48V/5A) and dual output (NMD-240 series:30V/5A each)

7 Built-in protection functions: overvoltage (OVP), overcurrent (OCP), overtemperature (OTP), overload (OLP)

8 Features like remote sense, remote ON/OFF control, DC OK signal, current sharing (parallel operation), output voltage/current programming

9 Auxiliary power output:5V/2A (front-end) and5V/10mA (module-level)

10 Low leakage current: <400uA/264VAC, touch current <100uA/264VAC

使用场景 APPLICATIONS

1 Medical equipment: Suitable for devices requiring medical safety standards (diagnostic instruments, patient monitors)

2 Industrial automation: Power supply for PLCs, sensors, actuators in automated production lines

3 Test & measurement systems: Stable power for lab equipment, oscilloscopes, signal generators

4 Communication equipment: Backup/main power for routers, switches, base stations

5 Data centers: Modular power for server racks or network devices

6 Laboratory research: Flexible power solution for experimental setups

7 Industrial control systems: Power for process control devices, HMIs, industrial computers

注意事项 PRECAUTIONS

1 Operating environment: Avoid humid/dusty/corrosive areas; ensure proper ventilation for heat dissipation

2 Derating requirements: Derate output power at ambient temp >50°C (per curve); for output voltage <12V and temp -15~-30°C, derate current to90% of rated value

3 Installation: Ensure correct grounding (FG terminal); use ESD protection when handling modules

4 Load limits: Do not exceed total 1200W output or 240W per module

5 Parallel operation: Connect CS pins mutually; output voltage difference <0.2V between modules; total current ≤ sum of parallel module rated currents

6 Accessory usage: Use original/compatible accessories; fill blank slots with BLANK-NMS240 modules

7 Maintenance: Regularly check loose connections/overheating; disconnect power before maintenance/module replacement

NMP1K2-KKHHKE-01-PDF数据手册-参考资料