产品特点 FEATURES

1 Brand: MW (Meanwell), Model: NMP1K2-KKEKEH-00

2 Type: 1200W modular AC-DC power supply with 6 slots (NMP1K2 series)

3 Input parameters: 90~264VAC /120~370VDC input voltage range, 47~63Hz frequency range

4 Output configuration: Configured with multiple modular outputs (includes 48V,12V,24V modules; each module up to 240W)

5 Efficiency: Up to 91% (typical at full load with H/K modules operating at 24V/48V)

6 Protection functions: Overload (constant current limiting), Overvoltage (shut down, re-power to recover), Over-temperature (shut down, auto recover when cooled), Short circuit (hiccup mode or constant current limiting)

7 Functional features: Remote sense (compensates up to0.5V voltage drop), Remote ON/OFF (open=ON, short=OFF), DC OK signal (TTL level), Current sharing (parallel operation support), Voltage/current programming (PV/PC pins), Auxiliary power (5V/2A front-end,5V/10mA per module)

8 Compliance: Meets ANSI/AAMI ES60601-1 Ed3.1, UL62368-1, TUV EN60601-1 Ed3.1, EN62368-1, IEC60601-1 Ed3.1, IEC62368-1, EAC TP TC004

9 Mechanical specs: Dimensions 250×127×41mm (L×W×H), weight ~2kg, M4 screw mounting (7~10Kgf-cm torque)

使用场景 APPLICATIONS

1 Industrial automation: Powering PLCs, sensors, actuators, control panels needing multi-DC voltages

2 Medical equipment: Diagnostic devices, patient monitors (compliant with medical safety standards)

3 Telecom infrastructure: Routers, switches, base stations requiring reliable multi-voltage power

4 Test & measurement labs: Flexible power for device testing with adjustable outputs

5 Data centers: Redundant setups via parallel operation for high availability

6 Renewable energy: Converting AC/DC to multi-DC voltages for solar/wind control systems

注意事项 PRECAUTIONS

1 Installation: Ensure proper grounding; use M4 screws with 7~10Kgf-cm torque

2 Operation limits: Do not exceed total 1200W or per-module240W; derate current per ambient temp (e.g.,90% for output<12V at -15~-30°C)

3 Remote sense: Use twisted pairs for +S/-S lines; max compensation0.5V

4 Parallel operation: Connect CS pins; voltage difference <0.2V between modules; use short thick wires

5 Protection: Do not bypass OVP/OCP/OTP; let unit cool after over-temperature

6 Wiring: Appropriate gauge (20-26AWG for control, thicker for power)

7 Maintenance: Keep clean; inspect connections periodically; no case opening without training

NMP1K2-KKEKEH-00-PDF数据手册-参考资料