产品特点 FEATURES

1 Modular design with 6 slots for NMP1K2, supporting up to1200W total output power; compatible with NMS-240 (single output up to240W:5V/36A,12V/20A,24V/10A,48V/5A) and NMD-240 (dual output up to240W combined) modules.

2 Wide input voltage range:90~264VAC or120~370VDC, suitable for global applications; frequency range47~63Hz.

3 High power factor (PF>0.95@230VAC full load) and efficiency up to91% (with H/K modules at24V/48V nominal voltage), reducing energy loss.

4 Complies with medical safety standards (2x MOPP between primary and secondary) and ITE standards (EN60601-1, EN62368-1), ensuring safe operation in medical and industrial environments.

5 Rich control functions: Remote ON/OFF (global/local), remote sense (compensates wiring voltage drop up to0.5V), output voltage/current programming (PV/PC), DC OK signal (indicates module output status), over-temperature alarm (T-Alarm), current sharing (CS for parallel operation).

6 Comprehensive protection mechanisms: Overload (constant current limiting), over-voltage (shut down, re-power to recover), over-temperature (auto shut down and recover when cool).

7 Auxiliary power outputs:5V-AUX-P (2A for NMP1K2) for system use; Vcc2 (5V/10mA) for module control.

8 Compact mechanical dimensions:250×127×41mm (L×W×H), lightweight (~2kg), easy to integrate into rack-mounted or compact systems.

使用场景 APPLICATIONS

1 Industrial automation systems: Powering PLCs, DCS, servo drives, and sensors with stable modular power.

2 Medical equipment: Suitable for devices requiring medical safety compliance (like diagnostic instruments, patient monitors) due to 2x MOPP isolation.

3 Test and measurement systems: Providing adjustable, reliable power for lab equipment, signal generators, and analyzers.

4 Telecom and data communication: Supporting rack-mounted telecom devices, routers, switches with high-efficiency modular power.

5 Data centers: Powering server racks, storage systems with scalable modular output.

6 Customized power solutions: Flexible slot configuration to meet diverse voltage/current requirements in various applications.

注意事项 PRECAUTIONS

1 Installation: Blank slots must be filled with BLANK-NMS240 accessory; use recommended screws (M4 for front-end, M3.5 for modules) with specified torque to ensure stable mounting.

2 Derating guidelines: When output voltage <12V and ambient temperature between-15℃ to-30℃, output current should be derated to90% of rated value; refer to derating curves for ambient temperature and input voltage effects.

3 Parallel operation: Max6 NMS-240 modules for NMP1K2; CS pins must be connected between modules; output voltage difference among parallel modules should be <0.2V; total output power must not exceed1200W; remote control should turn ON/OFF all parallel modules simultaneously.

4 Remote control logic: Global ON/OFF via RC1 (short to GND-P for ON); local module ON/OFF via RC2 (open for ON, short to GND for OFF); ensure shorting connector is assembled for initial operation.

5 Auxiliary power: Do not exceed the maximum current rating of auxiliary outputs (2A for5V-AUX-P,10mA for Vcc2) to avoid damage.

6 Safety: Follow electrical safety regulations during installation and maintenance; disconnect power before wiring or replacing modules.

NMP1K2-KKEKEE-01-PDF数据手册-参考资料