产品特点 FEATURES

1 Modular design: NMP1K2 model has 6 slots, compatible with single-output (NMS-240, up to240W) and dual-output (NMD-240, up to240W combined) modules; supports various output configurations (5V@36A,12V@20A,24V@10A,48V@5A, dual30V@5A etc.)

2 Input parameters: AC input range90-264VAC/120-370VDC, frequency range47-63Hz; high power factor (>0.95@230VAC full load, >0.98@115VAC full load)

3 Output characteristics: Adjustable voltage ranges (5V:3-6V,12V:6-15V,24V:15-30V,48V:30-55V); low ripple noise (max100-250mVp-p); precise regulation (line ±0.2-0.5%, load ±0.2-0.5%)

4 Protection functions: Overload (105-125% rated, shut down/repower to recover), overvoltage (constant current limiting), over-temperature (auto recover after cooling), short circuit (hiccup/constant current)

5 Control functions: Global/local remote ON/OFF (open=ON, short=OFF); remote sense (compensate up to0.5V drop); voltage/current programming (PV/PC pins); DC OK signal (TTL level status); current sharing (parallel load balance)

6 Auxiliary power: Front-end5V@2A (NMP1K2); module-level5V@10mA

7 Compliance: Safety standards (ANSI/AAMI ES60601-1 Ed3.1, UL62368-1); EMC standards (EN55032 Class B, EN61000 series)

8 Mechanical specs: Dimensions250×127×41mm; net weight~2kg; M4 screws (7-10Kgf-cm torque)

使用场景 APPLICATIONS

1 Industrial automation: Power for PLCs, sensors, actuators and control panels

2 Medical equipment: Compliant with medical standards, suitable for diagnostic devices and monitors

3 Telecom systems: Power for routers, switches and base stations

4 Test & measurement: Flexible outputs for oscilloscopes and signal generators

5 Robotics: Multiple voltages for motors and controllers

6 Data centers: Modular power for server racks and storage

7 Instrumentation: Precision power for analytical tools

注意事项 PRECAUTIONS

1 Installation: Use M4 screws with7-10Kgf-cm torque; install blank modules in unused slots; ensure proper airflow

2 Wiring: Twisted pairs for remote sense; parallel modules need short/large wires and CS pin connection; voltage difference <0.2V between parallel modules

3 Operation: Install shorting connector (RC1 to GND-P) before power-on; derate to90% current when voltage <12V and temp -15°C~-30°C

4 Maintenance: Check connections regularly; keep clean; disconnect power before replacement

5 Safety: Follow safety standards; avoid live parts; ensure proper grounding

NMP1K2-KKEHKK-00-PDF数据手册-参考资料