产品特点 FEATURES

Modular power supply with 6 slots for up to 1200W total output

1 Compliance with medical (2x MOPP between primary and secondary) and ITE safety standards

2 Supports multiple output modules (NMS-240 series:5V/36A,12V/20A,24V/10A,48V/5A) with adjustable voltage ranges

3 Advanced functions: Remote sense (compensates up to 0.5V voltage drop), output voltage programming (PV), output current programming (PC), DC OK signal (TTL level for output status), over-temperature alarm (T-Alarm signal)

4 Global/local ON/OFF control: Global control via RC1 (CN32-PIN6) and GND-P; local control via RC2 (module PIN3) and GND

5 Current sharing function for parallel operation of modules to balance load

6 Auxiliary power outputs: +5V-Aux_P (2A for NMP1K2) and Vcc2 (5V/10mA for modules)

7 Protection features: Overload (constant current limiting), overvoltage (shut down, re-power to recover), overtemperature (auto recovery after cooling)

8 High efficiency up to91% (typ.) at full load with H/K modules (24V/48V)

9 Wide input voltage range:90-264VAC,120-370VDC

10 Good EMC performance: Complies with EN55032 Class B (emission), EN61000 series (immunity)

11 Mechanical specs: Dimensions 250*127*41mm for NMP1K2, M4 mounting screws with recommended torque7-10 Kgf-cm

使用场景 APPLICATIONS

1 Industrial automation systems: Powering PLCs, DCS, and control panels

2 Medical equipment: Compliant with medical safety standards for diagnostic instruments

3 Test and measurement instruments: Multiple adjustable outputs for various testing needs

4 Telecommunications equipment: Reliable power for routers, switches, and communication modules

5 Data centers: Modular power solution for server racks and storage systems

6 Robotics systems: Powering multiple components with different voltage requirements

7 LED lighting systems: High-power output for large-scale LED installations

8 Broadcast equipment: Stable power for cameras, mixers, and transmission devices

注意事项 PRECAUTIONS

1 Mounting: Follow recommended screw sizes (M4 for front-end, M3.5 for output terminals) and torque specs; ensure maximum penetration depth as per guidelines

2 Global ON/OFF control: If not using global control, assemble the shorting connector (RC1 to GND-P) to enable output

3 Remote sense: Use twisted pairs for +S/-S lines to minimize interference

4 Parallel operation: Connect CS pins of modules; ensure output voltage difference <0.2V; total power not exceed1200W; max6 modules for NMP1K2; avoid PC function in parallel; use short/large diameter wiring

5 Temperature derating: When output voltage <12V and ambient temp is -15 to -30°C, derate output current to90% of rated; follow derating curves for different conditions

6 Wiring: Use 20-26AWG wire for module connections with10mm strip length

7 Protection: Do not exceed rated current/power; disconnect power before maintenance; ensure proper grounding

8 Module handling: Fill blank slots with BLANK-NMS240 accessory; do not operate without necessary modules

9 Safety: Comply with all applicable safety standards (medical/ITE) during installation and use

NMP1K2-KKEEEC-01-PDF数据手册-参考资料