产品特点 FEATURES

1 Modular architecture with 6 slots for output modules, supporting up to 1200W total power

2 Wide input voltage range: AC 90~264V or DC120~370V, compatible with global power grids

3 High power factor performance: PF>0.95 at full load (230VAC) and PF>0.98 at full load (115VAC)

4 Efficient operation: Maximum efficiency of 91% when using 24V/48V output modules at full load

5 Safety certifications: Complies with medical standards (2x MOPP isolation between primary and secondary) and ITE standards (ANSI/AAMI ES60601-1, UL62368-1, TUV EN60601-1)

6 Flexible output configurations: Each module offers adjustable voltages (5V:3~6V,12V:6~15V,24V:15~30V,48V:30~55V) and up to 240W per module

7 Multi-layer protection mechanisms: Overload (constant current limiting), overvoltage (shutdown and re-power recovery), overtemperature (auto-recovery after cooling), short circuit

8 Remote monitoring and control: Global/local ON/OFF, remote sense (compensates up to 0.5V wiring drop), DC OK signal (TTL level for output status), T-Alarm (overtemperature alert), current sharing for parallel operation

9 Auxiliary power supplies: Front-end provides 5V/2A, each module provides 5V/10mA for control circuits

10 Robust mechanical design: Compact size (250×127×41mm), vibration-resistant (10~500Hz,2G,60 minutes along X/Y/Z axes)

使用场景 APPLICATIONS

1 Medical equipment: Diagnostic devices, patient monitors, laboratory instruments (meets medical safety requirements)

2 Industrial automation: PLC systems, control panels, robotic arms (stable modular power supply)

3 Test and measurement: Electronic test equipment, data acquisition systems (flexible voltage adjustments)

4 Communication infrastructure: Telecom base stations, network switches (wide input range and high efficiency)

5 LED lighting systems: High-power LED arrays (adjustable voltage to match LED specifications)

6 Renewable energy applications: Solar power systems (supports wide DC input range)

7 Data centers and servers: Backup power units, distributed power supplies (parallel operation for higher capacity)

8 Industrial IoT devices: Edge computing nodes, sensor networks (reliable and compact)

注意事项 PRECAUTIONS

1 Installation: Ensure the shorting connector (RC1 to GND-P) is installed for the power supply to output; use recommended screws (M4 for mounting, M3.5 for terminals) and torque (7~10Kgf-cm for mounting,10Kgf-cm for terminals)

2 Environmental: Operate within -30~+70℃; derate output current as per the curve (e.g.,90% rated current when output voltage <12V and temp is -15~-30℃); avoid condensation (20~90% RH non-condensing)

3 Electrical: Do not exceed 1200W total power; when parallelizing modules, connect CS pins, ensure voltage difference <0.2V between modules, use short/large diameter wires; disable PC (current programming) function in parallel mode

4 Protection: Do not bypass any protection mechanisms; in case of overvoltage/overtemperature shutdown, wait for the device to cool down before re-powering

5 Maintenance: Keep the device dust-free to prevent overheating; regularly check connections for looseness; do not disassemble without professional expertise

NMP1K2-KKCCKH-01-PDF数据手册-参考资料