产品特点 FEATURES

1 Brand: MW (明纬), Model: NMP1K2-KK#HKH-01, belongs to NMP series modular power supply

2 Front-end specs: 1200W maximum power, 6 slots for output modules; AC input range90~264VAC / DC input range120~370VDC; frequency range47~63Hz

3 Power efficiency: Up to91% (typical) at full case load with H/K module (24V/48V) at nominal voltage; power factor>0.95@230VAC full load

4 Modular outputs: Supports NMS-240 series modules (single output up to240W) including5V@36A,12V@20A,24V@10A,48V@5A; each module has adjustable voltage range (e.g.,24V module:15~30V)

5 Protection features: Over temperature (shuts down, recovers after cooling), over voltage (shuts down, re-power to recover), overload (constant current limiting)

6 Functional features: Remote sense (compensates up to0.5V voltage drop), remote ON/OFF control (global and local), DC OK signal (TTL level indicates module status), current sharing (for parallel module operation), auxiliary power outputs (5V/2A front-end,5V/10mA per module)

7 Safety compliance: Meets medical (ANSI/AAMI ES60601-1 Ed3.1, TUV EN60601-1 Ed3.1) and ITE (UL62368-1, EN62368-1, IEC62368-1) standards; isolation: Primary-secondary2x MOPP, primary-earth1x MOPP; withstand voltages: I/P-O/P4KVAC, I/P-FG2KVAC, O/P-FG0.5KVAC

使用场景 APPLICATIONS

1 Medical equipment: Diagnostic devices, patient monitors, laboratory instruments (compliant with medical safety standards)

2 Industrial automation: PLC systems, control panels, robotic equipment (stable modular power supply for various components)

3 Telecom and data centers: Servers, network switches, communication racks (high power, modular design fits rack-mounted setups)

4 Test and measurement: Lab instruments requiring adjustable, stable power outputs (supports multiple voltage/current combinations)

5 Industrial control systems: Powering multiple components with different voltage needs (modular slots allow flexible configuration)

注意事项 PRECAUTIONS

1 Installation: Ensure proper grounding via FG terminal; follow recommended mounting torque (12Kgf-cm for AC input terminal,7~10Kgf-cm for mounting screws)

2 Operation: When using global ON/OFF control, assemble the shorting connector (RC1 to GND-P) if no external control is used; local ON/OFF for modules: open=ON, short=OFF (RC2 to GND)

3 Temperature management: Operate within -30~+70°C; if output voltage <12V and temp between -15~-30°C, derate output current to90% of rated value

4 Parallel operation: Connect CS pins of modules together; ensure output voltage difference between modules <0.2V; total power not exceed1200W; use short/large diameter wires; remote control must turn all parallel modules on/off simultaneously; do not use PC (current programming) function in parallel

5 Protection handling: If over temperature occurs, let the unit cool down before restarting; over voltage protection requires re-powering to recover

6 Wiring: Use20~26AWG wires for control pins; M3.5 screws for output terminals with max penetration depth of10mm

7 Accessory use: Fill blank slots with BLANK-NMS240 accessory to maintain safety and performance

NMP1K2-KK#HKH-01-PDF数据手册-参考资料