产品特点 FEATURES

1 Modular design with 6 slots, supporting up to 1200W total output power (each slot compatible with NMS-240 single/dual output modules)

2 Wide input voltage range:90~264VAC or120~370VDC, adapting to various power grid conditions

3 High energy efficiency (up to91% typical at full load) and power factor (>0.95 at230VAC full load), reducing energy consumption

4 Multiple output voltage options:5V/36A,12V/20A,24V/10A,48V/5A (adjustable ranges for each, e.g.,5V module:3~6V), meeting diverse device needs

5 Compliance with safety standards:Medical (2x MOPP between primary and secondary) and ITE (UL62368-1, EN60601-1 Ed3.1, etc.), suitable for medical and industrial applications

6 Comprehensive protection functions:Over-temperature (auto-recovery after cooling), overload (constant current limiting), over-voltage (shutdown and re-power recovery)

7 Remote monitoring and control:DC OK signal (TTL level indicating output status), T-Alarm (over-temperature alert), remote ON/OFF (global/local control options)

8 Current sharing capability:Supports parallel operation of modules for higher current output (max6 slots for NMP1K2), ensuring balanced current distribution

9 Auxiliary power output:5V/2A (front-end) and5V/10mA (module-level), providing power for control circuits

10 Remote sense function:Compensates for voltage drop on load wiring up to0.5V, ensuring stable output voltage at the load end

使用场景 APPLICATIONS

1 Medical equipment:Suitable for diagnostic devices (e.g.,ultrasound machines), patient monitoring systems, and laboratory instruments (complying with medical safety standards)

2 Industrial automation:Power supply for PLCs, servo drives, sensors, and control panels in manufacturing lines

3 Test and measurement:Provides stable power for oscilloscopes, signal generators, and electronic test benches

4 Communication systems:Supports base stations, routers, and network switches in telecom rooms

5 Data centers:Powers server racks, storage devices, and cooling systems (high efficiency reduces operational costs)

6 Robotics:Supplies power to robotic arms, motion controllers, and end-effectors in industrial automation

7 Laboratory research:Used in scientific experiments requiring precise and stable DC power outputs

8 Renewable energy systems:Compatible with solar or wind power converters (wide DC input range)

注意事项 PRECAUTIONS

1 Installation:Ensure proper mounting torque (7~10 Kgf-cm for M4 screws), maintain sufficient airflow (follow indicated direction) to prevent overheating

2 Operation:Use the shorting connector (RC1 to GND-P) if global ON/OFF control is not used; set global/local ON/OFF correctly to avoid no-output issues

3 Environmental:Derate output current at high ambient temperatures (refer to derating curve); operate in non-condensing humidity (20~90% RH) and temperature range (-30~+70℃)

4 Parallel operation:Connect CS pins of modules for current sharing; ensure output voltage difference between modules <0.2V; total power not exceeding1200W; use short/large-diameter wiring

5 Safety:Ground the device properly; avoid touching live parts when powered on; do not open the case (risk of electric shock)

6 Maintenance:Regularly check for loose connections, dust accumulation, and physical damage; replace modules only with compatible Meanwell NMS-240 series

7 Remote sense:Use twisted-pair wires for sense lines to minimize interference; ensure sense lines are connected correctly to compensate voltage drop

8 Voltage adjustment:Follow the specified range for each module (e.g.,5V module:3~6V) to avoid damage to connected devices

NMP1K2-KK#HCC-01-PDF数据手册-参考资料