产品特点 FEATURES

Modular design with 6 slots (NMP1K2 model) for flexible output configuration, supporting up to 1200W total power

Wide input voltage range: 90~264VAC (47~63Hz) or 120~370VDC

High power factor: PF>0.95 at 230VAC full load, PF>0.98 at 115VAC full load

High efficiency: Up to 91% (full case load with H/K modules at nominal 24V/48V)

Compliance with multiple safety standards: ANSI/AAMI ES60601-1 Ed3.1, UL62368-1, TUV EN60601-1 Ed3.1, EN62368-1, IEC60601-1 Ed3.1, IEC62368-1, TUV IEC60950-1, EAC TP TC004

Robust isolation: Primary-Secondary (2x MOPP), Primary-Earth (1x MOPP); Withstand voltage: I/P-O/P=4KVAC, I/P-FG=2KVAC, O/P-FG=0.5KVAC

Comprehensive protection: Overload (constant current limiting), Overvoltage (shut down, re-power to recover), Over-temperature (shut down, auto recover when cool)

Auxiliary power output:5V@2A (NMP1K2) for external devices

Advanced control features: Remote ON/OFF, remote sense, voltage/current programming, DC OK signal (TTL level), current sharing for parallel operation

Wide operating temperature range: -30~+70℃ (with derating)

Low leakage current: <400uA at 264VAC, touch current <100uA at 264VAC

Long hold-up time:16ms at230VAC@75% total output power,10ms at full load

Compact size:250*127*41mm (L*W*H)

Vibration resistance:10~500Hz,2G10min/cycle,60min along X/Y/Z axes

EMC compliance: Meets EN55032/CISPR32, EN55011/CISPR11 for emission; EN61000-4 series for immunity

使用场景 APPLICATIONS

Industrial automation: Powering PLCs, sensors, actuators, and control systems in manufacturing lines

Medical equipment: Suitable for diagnostic devices, patient monitors, and lab instruments (compliant with medical safety standards)

Telecommunications: Providing stable power for network switches, routers, and telecom gear in data centers

Test & measurement: Supporting electronic testing equipment with adjustable, reliable power

LED lighting: Powering high-power LED arrays in industrial or commercial lighting applications

Renewable energy: Integrating with solar/wind systems for DC power distribution

Audio/visual: Powering professional AV equipment like mixers, amplifiers, and broadcast systems

Instrumentation: Supplying power to precision instruments in research labs

注意事项 PRECAUTIONS

Installation: Ensure proper grounding to prevent electric shock. Use recommended screw torque (10Kgf-cm for output terminals,12Kgf-cm for input) and wire size

Temperature management: Do not operate beyond -30~+70℃. Derate output current as per derating curve (e.g.,90% rated current for Vo<12V at -15~-30℃)

Load limits: Avoid overloading beyond 1200W max capacity or individual module limits

Remote control: For global ON, short RC1 (CN32-PIN6) to GND-P (CN32-PIN3); For local control, open RC2 to GND for ON, short for OFF

Parallel operation: Connect CS pins together, ensure output voltage difference <0.2V between modules; Do not use PC function in parallel mode

Maintenance: Disconnect power before opening the unit or replacing modules

Medical use: Follow local medical device regulations and use approved accessories

Leakage current: Ensure AC outlet is properly grounded

Storage: Store in dry, cool place (-40~+85℃,10~95% RH non-condensing)

NMP1K2-KECKKK-04-PDF数据手册-参考资料