产品特点 FEATURES

1 Modular design with 6 slots, supporting up to1200W total output power

2 Interchangeable output modules (single/dual output, up to240W per module) with adjustable voltage ranges (e.g.,5V module:3-6V,12V:6-15V,24V:15-30V,48V:30-55V)

3 Wide input voltage range: AC90-264V or DC120-370V, 47-63Hz frequency

4 High efficiency (up to91% for 24V/48V modules at nominal voltage)

5 Compliance with multiple safety standards: ITE (UL62368-1) and medical (2x MOPP between primary-secondary, ANSI/AAMI ES60601-1 Ed3.1)

6 Comprehensive protection functions: Overload (constant current limiting), overvoltage (shutdown, repower to recover), overtemperature (auto-recover after cooling)

7 Flexible control options: Global (RC1 pin) and local (RC2/RC3 pins) ON/OFF, remote sense (compensates up to0.5V wiring drop), DC OK signal (TTL level for output status)

8 Parallel operation support: Current sharing (CS pin) for balanced load distribution

9 Auxiliary power outputs: Front-end (5V/2A) and per-module (5V/10mA)

使用场景 APPLICATIONS

1 Industrial automation: Powering PLCs, sensors, actuators in manufacturing lines

2 Medical equipment: Diagnostic tools, patient monitors requiring medical safety compliance

3 Test & measurement: Lab instruments like oscilloscopes, signal generators needing stable adjustable power

4 Telecommunication: Routers, switches, base station components

5 Data centers: Modular power for server racks or network devices

6 R&D labs: Customizable power for prototype testing

7 Broadcast systems: Audio/video equipment requiring reliable output

注意事项 PRECAUTIONS

1 Installation: Follow mounting torque guidelines (M4 screws:7-10Kgf-cm for front-end; M3.5:10Kgf-cm for modules). Ensure proper airflow direction.

2 Derating: When output voltage <12V and ambient temp is -15°C to -30°C, derate current to90% of rated. Refer to derating curves for high ambient temps.

3 Remote control: Install the shorting connector (RC1 to GND-P) if not using external global control. Local ON/OFF: Open RC2/RC3 to GND=ON, short=OFF.

4 Parallel operation: Connect CS pins of modules, ensure output voltage difference <0.2V. Total power must not exceed1200W. Avoid PC function in parallel setups.

5 Safety: Do not operate outside specified ranges. Disconnect power before servicing. Comply with local electrical codes.

6 Environment: Store in dry conditions (-40°C to +85°C, non-condensing RH). Operating temp: -30°C to +70°C (with derating)

NMP1K2-KCCEEE-04-PDF数据手册-参考资料