产品特点 FEATURES

1 Modular power supply with 6 slots, supporting up to 1200W total output power

2 Compatible with single output modules (5V@36A,12V@20A,24V@10A,48V@5A) and dual output modules, each up to 240W

3 Voltage adjustable ranges for modules (e.g.,5V:3-6V,12V:6-15V,24V:15-30V,48V:30-55V)

4 Complies with medical safety standards (2x MOPP between primary and secondary) and ITE standards (UL62368-1, EN60601-1 Ed3.1, etc.)

5 Multiple protection functions: Overload (constant current limiting), overvoltage (shutdown and re-power recover), overtemperature (automatic recovery after cooling)

6 Remote control capabilities: Global/local ON/OFF (open=ON, short=OFF for local RC2), remote sense (compensates up to 0.5V voltage drop)

7 Monitoring signals: DC OK (TTL level indicating module output status), T-Alarm (overtemperature alert)

8 Programmable features: Output voltage (PV pin) and current (PC pin) adjustment

9 Supports current sharing for parallel module operation to balance load

10 Auxiliary power outputs:5V/2A (front-end) and5V/10mA (module-level)

11 Compact mechanical design:250×127×41mm (L×W×H) for front-end unit

使用场景 APPLICATIONS

1 Industrial automation: Powering PLCs, sensors, actuators and control systems in manufacturing lines

2 Medical devices: Suitable for diagnostic tools, patient monitors and other medical equipment requiring compliant stable power

3 Telecommunications: Modular power supply for routers, switches and telecom rack components

4 Test and measurement: Adjustable output for lab instruments, prototype testing and electronic device validation

5 Data centers: Backup power or modular supply for server peripherals and network equipment

6 Custom electronics: Flexible output configurations for specialized or prototype systems

注意事项 PRECAUTIONS

1 Installation: Ensure proper grounding; use M4 screws with7-10 Kgf-cm torque for mounting, M3.5 screws (10mm penetration depth) for output terminals

2 Operating conditions: Follow derating guidelines—when output voltage <12V and ambient temp is -15 to -30°C, derate current to90% of rated; avoid operating beyond -30 to +70°C

3 ON/OFF control: The shorting connector (RC1 to GND-P) must be installed for the unit to output power; use correct logic for global/local control (open=ON, short=OFF for local RC2)

4 Parallel operation: Connect CS pins of modules together; ensure output voltage difference <0.2V between modules; total current ≤ rated per module × number of modules, total power ≤1200W

5 Wiring: Use20-26AWG wires for control signals with10mm strip length; twist remote sense lines in pairs to reduce interference

6 Maintenance: Do not open the unit while powered; keep away from moisture, dust and corrosive environments

7 Protection handling: For overtemperature shutdown, cool the unit before restarting; overvoltage/overload protection requires re-powering to recover

NMP1K2-KCCCEK-07-PDF数据手册-参考资料