产品特点 FEATURES

1 Modular design: NMP1K2 is a 1200W front-end power supply with 6 slots, supporting single-output (NMS-240, up to240W each) or dual-output (NMD-240) modules for flexible voltage configuration (5V/12V/24V/48V or dual outputs)

2 Wide input range: AC90~264V or DC120~370V, suitable for global applications

3 High efficiency: Up to91% at full load (with H/K modules at nominal24V/48V), reducing energy loss and heat

4 Comprehensive protection: Overload (shut down, re-power to recover), Over Voltage (constant current limiting), Over Temperature (auto shut down and recover when temp drops), Short Circuit (hiccup mode or constant current limiting)

5 Rich functionalities: Remote sense (compensates up to0.5V voltage drop), global/local remote ON/OFF control, output voltage/current programming (PV/PC pins), DC OK status signal (TTL level), T-Alarm over-temperature alert, and current sharing for parallel operation

6 Safety compliance: Meets medical standards (2x MOPP between primary-secondary) and ITE standards (ANSI/AAMI ES60601-1 Ed3.1, UL62368-1 etc.)

7 Mechanical specs: Dimensions 250×127×41mm (L×W×H), weight ~2kg, M4 mounting screws (7~10Kgf-cm torque)

使用场景 APPLICATIONS

1 Medical equipment: Diagnostic devices (ultrasound, blood analyzers), patient monitors (compliant with medical safety standards)

2 Industrial automation: PLC systems, robotics, control panels (flexible modular configuration for diverse voltage needs)

3 Test and measurement: Lab instruments, electronic test benches (supports voltage/current programming)

4 Telecommunications: Network switches, base station peripherals (high efficiency and reliable operation)

5 Data centers: Server racks, storage systems (scalable modular design for power management)

注意事项 PRECAUTIONS

1 Installation: Ensure the shorting connector (RC1 to GND-P) is assembled; otherwise, no output

2 Temperature derating: When output voltage <12V and ambient temp -15°C~-30°C, derate current to90% of rated value; follow derating curve for temps above50°C

3 Remote sense: Connect +S/-S pins of NMS-240 modules to load terminals to compensate voltage drop (max0.5V)

4 Parallel operation: Connect CS pins of modules; output voltage difference <0.2V; total power ≤1200W; use short/large wires; do not use PC function in parallel

5 Remote control: For NMS-240: Open RC2 (to GND) to turn on, short to turn off; for NMD-240: Open RC2/RC3 to turn on V1/V2, short to turn off

6 Safety: Proper grounding; do not operate beyond specified limits

NMP1K2-KCCCE#-02-PDF数据手册-参考资料