产品特点 FEATURES

1 Brand: MW (Meanwell), Model: NMP1K2-K##CCK-00

2 Modular power supply with 6 slots, supporting up to 1200W total output

3 Wide input voltage range:90~264VAC /120~370VDC, frequency range:47~63Hz

4 High efficiency: Up to91% (full load with H/K modules at nominal24V/48V)

5 Compliant with medical (2x MOPP between primary and secondary) and ITE safety standards

6 Each module supports up to240W output, adjustable voltage ranges (e.g.,5V:3~6V,12V:6~15V,24V:15~30V,48V:30~55V)

7 Multiple protection functions: Overload (constant current limiting), overvoltage (shut down and recover on re-power), overtemperature (auto-recover after cooling)

8 Rich remote control and monitoring features: Remote sense (compensates voltage drop up to0.5V), DC OK signal (TTL level indicating output status), current sharing (for parallel operation), output voltage/current programming

9 Auxiliary power outputs: Front-end provides5V/2A; each module provides5V/10mA

10 Compact design: Dimensions 250*127*41mm (L*W*H), weight ~2kg

注意事项 PRECAUTIONS

1 Must install the shorting connector (RC1 to GND-P) to enable global output; no output without it

2 Twist remote sense lines (+S/-S) to minimize interference

3 Parallel operation rules: Connect CS pins, output voltage difference <0.2V, total power ≤1200W

4 Derate output current to90% for outputs <12V at -15~-30°C

5 Follow mounting torque specs: AC terminals ≤12Kgf-cm, DC terminals ≤10Kgf-cm

6 Do not exceed auxiliary power load limits (front-end:5V/2A; module:5V/10mA)

7 Use recommended wire sizes (20~26AWG) and strip length (10mm) for DC terminals

8 Ensure proper grounding for safety and performance

NMP1K2-K##CCK-00-PDF数据手册-参考资料