产品特点 FEATURES

1 Brand: MW (明纬), Model: NMP1K2-K#CHE#-00, modular power supply (NMP series)

2 Total output capacity:1200W max (supports up to6 output modules)

3 Input parameters:90~264VAC/120~370VDC voltage range,47~63Hz frequency range,PF>0.95@230VAC full load,typical efficiency up to91%

4 Safety compliance:Meets medical standards (2x MOPP isolation) and ITE standards (ANSI/AAMI ES60601-1 Ed3.1,UL62368-1,TUV EN60601-1 Ed3.1,EN62368-1,IEC60601-1 Ed3.1,IEC62368-1,EAC TP TC004)

5 Isolation and withstand voltage:Primary-Secondary (4KVAC),Primary-FG (2KVAC),O/P-FG (0.5KVAC)

6 K module (48V) specs:5A rated current,240W max power,30~55V voltage adjustment range,250mVp-p max ripple&noise,±0.2% line regulation,±0.5% load regulation

7 Key functions:Remote sense (compensate voltage drop up to0.5V),output voltage/current programming,DC OK signal (TTL level),current sharing for parallel operation,global/local ON/OFF control,over-temperature/overload/over-voltage protection

使用场景 APPLICATIONS

1 Industrial automation equipment needing flexible DC power configurations

2 Medical devices compliant with ES60601-1 safety standards

3 Test and measurement systems requiring stable,adjustable DC outputs

4 Telecommunication and data center infrastructure

5 Applications needing parallel operation for higher power capacity

6 Any scenario where reliable,modular DC power with multiple output options is required

注意事项 PRECAUTIONS

1 Installation:Use the provided shorting connector to link RC1 (CN32-PIN6) and GND-P (CN32-PIN3) if global ON/OFF control is not used

2 Temperature derating:When output voltage <12V and ambient temperature is -15~-30°C,reduce output current to90% of rated value

3 Parallel operation:Connect CS pins of modules,ensure output voltage difference <0.2V,total power not exceed1200W,max6 modules allowed

4 Remote sense:Utilize +S/-S pins to compensate voltage drop on load wiring (up to0.5V)

5 Protection mechanisms:Over-temperature triggers auto-recovery after cooling;overload/over-voltage requires re-powering to recover

6 Wiring guidelines:Follow terminal torque specs (10Kgf-cm for output terminals,12Kgf-cm for input terminals)

NMP1K2-K#CHE#-00-PDF数据手册-参考资料