产品特点 FEATURES

Modular design with 6 slots, supporting up to 1200W total output power

Compatible with multiple output modules:5V@36A,12V@20A,24V@10A,48V@5A (each module up to240W)

Compliance with strict safety standards:ANSI/AAMI ES60601-1 Ed3.1,UL62368-1,TUV EN60601-1 Ed3.1,EN62368-1,IEC60601-1 Ed3.1,IEC62368-1,TUV IEC60950-1,EAC TP TC004

Wide input voltage range:90~264VAC /120~370VDC, adapting to various power grids

High efficiency:Up to91% (full load with H/K modules at24V/48V nominal voltage)

Multiple protection functions:Overload (shut down, re-power to recover), overvoltage (constant current limiting), overtemperature (auto recover after temp drop)

Remote control capability:Global/local ON/OFF via RC pins (open=ON, short=OFF)

DC OK signal:TTL level output indicating module status (4.5~5.5V when ON,0~0.5V when OFF)

Current sharing function:Supports parallel operation of modules for higher current output

Auxiliary power output:5V@2A for powering control circuits

使用场景 APPLICATIONS

Medical equipment:Hospital diagnostic devices (ultrasound, patient monitors), laboratory testing instruments (complying with medical safety standards)

Industrial automation:PLC systems, DCS controllers, industrial robot power supplies, factory production line equipment

Communication systems:Base station power modules, network equipment racks

Test and measurement:Signal generators, oscilloscopes, electronic component testers

Data centers:Server rack power distribution units, backup power systems

Industrial control panels:Power supply for various control components in manufacturing

注意事项 PRECAUTIONS

Derating guidelines:When output voltage <12V and ambient temperature is -15°C~-30°C, reduce output current to90% of rated value; refer to derating curve for high-temperature operation

Mounting requirements:Use M4 screws with torque7~10 Kgf-cm; max penetration depth4mm to avoid damaging internal components

Remote sense usage:Connect +S/-S pins to load terminals to compensate voltage drop up to0.5V on long wires

Parallel operation:Ensure output voltage difference between modules <0.2V; connect CS pins of all modules; total output power not exceed1200W; use short, thick wires for parallel connections

Global ON/OFF setup:The shorting connector (RC1 to GND-P) must be installed for the power supply to output power

Environmental limits:Operate within -30°C~+70°C (derate at high temps) and20%~90% RH (non-condensing)

Safety precautions:Do not exceed max load current; ensure proper grounding to meet safety standards; avoid touching live parts during operation

NMP1K2-HKEKEC-00-PDF数据手册-参考资料