产品特点 FEATURES

1 Modular design: NMP1K2 model supports up to 6 slots, providing maximum 1200W output; compatible with single-output (NMS-240:5V/36A,12V/20A,24V/10A,48V/5A) and dual-output (NMD-240: dual 30V/5A) modules

2 Wide input range: AC 90~264V or DC120~370VDC, frequency 47~63Hz, suitable for global applications

3 High performance: Power factor >0.95 (230VAC full load), efficiency up to 91% (full load with H/K modules at 24V/48V)

4 Safety compliance: Meets medical (2x MOPP isolation between primary and secondary) and ITE standards (ANSI/AAMI ES60601-1, UL62368-1, TUV EN60601-1)

5 Flexible control: Supports global/local ON/OFF, remote sense (compensate up to 0.5V voltage drop), output voltage (PV) and current (PC) programming

6 Protection mechanisms: Over-temperature (auto-recovery after cooling), overload (constant current limiting), over-voltage (shut down, re-power to recover)

7 Auxiliary and signals: 5V/2A auxiliary power, DC OK signal (TTL level for output status), T-Alarm signal (over-temperature alert)

8 Current sharing: Allows parallel operation of modules with CS pin connection for balanced current distribution

使用场景 APPLICATIONS

1 Medical equipment: Suitable for patient monitors, diagnostic devices, and lab analyzers requiring medical safety compliance

2 Industrial automation: Powers PLCs, sensors, actuators, and control systems with multiple stable output voltages

3 Test and measurement: Used in test benches for electronic components needing adjustable and precise power

4 Communication systems: Supports routers, switches, and base stations with flexible voltage configurations

5 Data centers: Modular power solution for server racks or network devices, enabling easy maintenance and scalability

6 Other applications: Any system needing multiple outputs, remote monitoring, or parallel operation for higher power capacity

注意事项 PRECAUTIONS

1 Installation: Ensure shorting connector (RC1 to GND-P) is assembled for global ON/OFF; blank slots must use BLANK-NMS240 modules

2 Derating: When output voltage <12V and ambient temp is -15°C~-30°C, derate current to 90% of rated value; follow derating curves for temp and input voltage

3 Parallel operation: Connect CS pins of modules, ensure output voltage difference <0.2V; max 6 slots for NMP1K2, total power ≤1200W

4 Remote control: Use twisted pairs for remote sense to avoid interference; simultaneous ON/OFF for parallel modules

5 Environment: Operate within -30°C~+70°C (with derating), 20~90% RH non-condensing; avoid dust, moisture, or corrosive environments

6 Safety: Properly ground the device; do not exceed rated power/voltage; disconnect power before maintenance

7 Programming: Follow PV/PC ranges in manual; do not use PC function for parallel modules

NMP1K2-HKCCEE-00-PDF数据手册-参考资料