产品特点 FEATURES

1 Modular design with 6 slots for NMP1K2 model, supporting up to 1200W total output power

2 Wide input voltage range:90~264VAC or120~370VDC, frequency range47~63Hz

3 High power factor:PF>0.95 at230VAC full load, PF>0.98 at115VAC full load

4 High efficiency:up to91% typical at full load with H/K modules (24V/48V nominal)

5 Compliance with multiple safety standards:ANSI/AAMI ES60601-1 Ed3.1, UL62368-1, TUV EN60601-1 Ed3.1, EN62368-1, IEC60601-1 Ed3.1, IEC62368-1, EAC TP TC004

6 Multiple protection functions:overload (constant current limiting), overvoltage (shut down, re-power to recover), overtemperature (shut down, auto recover when temp drops)

7 Flexible control and monitoring:remote on/off (local/global), DC OK signal (TTL level for output status), temperature alarm (T-Alarm), voltage programming (PV), current programming (PC), remote sense (compensate up to0.5V wiring drop)

8 Current sharing capability for parallel operation of NMS-240 modules

9 Auxiliary power outputs:5V/2A for front-end (NMP1K2),5V/10mA for each NMS-240 module

10 Low leakage current:<400uA at264VAC, touch current<100uA at264VAC

使用场景 APPLICATIONS

1 Medical devices:diagnostic equipment, patient monitors, medical imaging systems (complying with ES60601-1 standard)

2 Industrial automation:PLC systems, motor drives, control panels requiring multiple stable DC outputs

3 Telecom and data centers:base stations, server racks, network equipment needing modular power solutions

4 Test and measurement instruments:lab equipment, signal generators, oscilloscopes requiring precise voltage control

5 Broadcast and media equipment:cameras, switchers, transmitters needing reliable power

6 Other applications:industrial IoT devices, renewable energy systems, and scenarios requiring flexible modular power supply with multiple outputs

注意事项 PRECAUTIONS

1 Ensure the shorting connector (RC1 to GND-P) is assembled for NMP1K2 if global ON/OFF control is not used; otherwise no output

2 When operating at ambient temperatures between-15°C and-30°C with output voltage below12V, derate output current to90% of rated

3 For parallel operation of NMS-240 modules:connect CS pins of all modules, ensure output voltage difference <0.2V between modules, total power ≤1200W for NMP1K2, use short/large-diameter wiring, do not use PC function

4 Follow local ON/OFF logic:open circuit for ON, short circuit for OFF (between RC2/RC3 and corresponding GND pins)

5 Do not exceed max mounting torque:12Kgf-cm for AC input terminals,10Kgf-cm for DC output terminals

6 Overtemperature protection:output shuts down auto and recovers when temp drops

7 Overvoltage protection:output shuts down; re-power to recover

8 Refer to official function manual for detailed operation of remote sense, programming and monitoring functions

9 Ensure proper airflow direction as per mechanical specs

10 Do not exceed rated current/voltage of any module or auxiliary power

NMP1K2-HHKCCC-05-PDF数据手册-参考资料