产品特点 FEATURES

Modular power supply design with 6 slots for NMP1K2 model, supporting up to 1200W total output power.

Compatible with multiple output modules:5V (C code,36A,180W),12V(E code,20A,240W),24V(H code,10A,240W),48V(K code,5A,240W) etc., each module with adjustable voltage range.

Compliance with safety standards including EN60601-1 (medical), UL62368-1, IEC60601-1, IEC62368-1, ensuring reliable and safe operation.

Built-in protection functions: overvoltage protection (OVP), overcurrent protection (OCP), overtemperature protection (OTP), overload protection (OLP) with appropriate recovery mechanisms.

Support for remote control features: global ON/OFF (via RC1 pin) and local ON/OFF (via RC2/RC3 pins for modules), remote sense (compensate voltage drop up to 0.5V).

Current sharing capability for parallel operation of modules, ensuring balanced load distribution.

Auxiliary power outputs:5V-AUX-P (2A for NMP1K2) and Vcc2 (5V/10mA for modules), providing power for control circuits.

DC OK signal (TTL level) indicating module output status, and T-Alarm signal for overtemperature warning.

Wide input voltage range (90-264VAC,120-370VDC) and frequency range (47-63Hz), suitable for global applications.

使用场景 APPLICATIONS

Industrial automation systems: Powering PLCs, sensors, actuators and control panels in manufacturing lines.

Medical equipment: Compatible with diagnostic instruments, patient monitoring systems and laboratory tools (complies with EN60601-1 medical standard).

Test and measurement instruments: Providing stable power for oscilloscopes, signal generators and precision testing tools.

Communication systems: Powering routers, switches, base stations and network equipment in data centers or telecom facilities.

Industrial control systems: Used in process control, robotics and factory automation setups requiring multiple voltage outputs.

Data centers: Supporting server racks and network devices needing modular and scalable power solutions.

注意事项 PRECAUTIONS

Installation: Follow mounting instructions (M4 screws, torque7-10 Kgf-cm for NMP1K2), ensure proper ventilation and air flow.

Module Handling: Insert modules into correct slots as per configuration; secure terminals with max torque10 Kgf-cm for output terminals.

Remote Sense: Use +S/-S pins to compensate voltage drop on load wiring; avoid exceeding 0.5V drop.

Parallel Operation: Connect CS pins of modules together; ensure output voltage difference <0.2V between modules; total load not exceeding1200W for NMP1K2.

Temperature Derating: If output voltage <12V and ambient temp between -15°C and -30°C, derate current to90% of rated value; refer to derating curves.

ON/OFF Control: Install shorting connector between RC1 (CN32-PIN6) and GND-P (CN32-PIN3) if not using global control; local control requires proper RC2/RC3 pin connection.

Safety Compliance: Operate within specified voltage/current ranges; avoid overloading; follow all safety standards.

Protection Triggering: Allow unit to cool down after OTP; check load/voltage settings before repowering after OVP/OCP.

NMP1K2-HHCKCK-00-PDF数据手册-参考资料