产品特点 FEATURES

1 Modular design: NMP1K2 supports up to 6 slots with NMS-240 (single output, max 240W) and NMD-240 (dual output, max240W) modules, total power up to1200W.

2 Wide input range: AC 90-264V, DC120-370V; high power factor (PF>0.95@230VAC full load, PF>0.98@115VAC full load).

3 Safety compliance: Meets medical (2x MOPP between primary-secondary) and ITE standards (ANSI/AAMI ES60601-1, UL62368-1, TUV EN60601-1, etc.).

4 Rich protection: Overload (constant current limiting), overvoltage (shut down, re-power to recover), overtemperature (auto recover when cool), short circuit protection.

5 Flexible output: Modules support voltage adjustment (e.g., NMS-240-24:15-30V), remote sense (compensate up to0.5V drop), remote ON/OFF, DC OK signal (TTL level), current sharing for parallel operation.

6 High efficiency: Up to91% at full load with H/K modules (24V/48V nominal).

使用场景 APPLICATIONS

1 Industrial automation: Powering PLCs, sensors, actuators, and control systems.

2 Medical equipment: Suitable for diagnostic tools, patient monitors (compatible with medical safety standards).

3 Telecommunications: Powering routers, switches, base station components, and communication devices.

4 Test & measurement: Providing stable, adjustable power for lab instruments and testing setups.

5 Data centers: Modular power supply for server racks, storage systems, and network equipment.

6 Broadcast systems: Powering audio/video transmitters, mixers, and broadcast gear.

注意事项 PRECAUTIONS

1 Installation: Ensure proper grounding (FG terminal); follow mounting torque specs (M4 screws:7-10 Kgf-cm for NMP1K2).

2 Module use: Only use compatible modules (NMS-240/NMD-240); fill blank slots with BLANK-NMS240 to maintain safety.

3 Temperature derating: For output voltage <12V and ambient temp -15°C to -30°C, derate output current to90% of rated.

4 Parallel operation: When paralleling modules, connect CS pins mutually; ensure output voltage difference <0.2V; total power not exceed1200W for NMP1K2; do not use PC function in parallel mode.

5 Remote control: For local ON/OFF, open RC2 pin to turn on, short to turn off (NMS modules); use shorting connector for global ON/OFF (RC1 to GND-P).

6 Wiring: Use appropriate wire gauge (20-26AWG for module terminals) and strip length (10mm) to avoid loose connections or short circuits.

7 Safety: Do not touch live parts when powered on; avoid operating without proper insulation.

NMP1K2-HEHEC#-00-PDF数据手册-参考资料