产品特点 FEATURES

The MW NMP1K2-HEEKCC-00 is a 1200W modular power supply (6 slots) designed for industrial and medical applications. Key features include:

1 Modular design with 6 slots, supporting multiple output modules (H:24V@10A, E:12V@20A, K:48V@5A, C:5V@36A as per config code HEEKCC)

2 Wide input voltage range:90~264VAC/120~370VDC, frequency range47~63Hz

3 High efficiency up to91% (full load with H/K modules at 24V/48V)

4 Compliance with medical and industrial safety standards:ANSI/AAMI ES60601-1 Ed3.1, UL62368-1, TUV EN60601-1 Ed3.1, EN62368-1, IEC60601-1 Ed3.1, IEC62368-1, EAC TP TC004

5 Multiple protection functions:Over-temperature (shutdown auto-recover), overload (constant current limiting), over-voltage (shutdown re-power to recover)

6 Remote sense to compensate voltage drop up to0.5V

7 Current sharing for parallel operation of modules

8 Global/local ON/OFF control (global via RC1 to GND-P; local via RC2 to GND)

9 DC OK signal (TTL level) and T-alarm for over-temperature

10 Auxiliary power:5V@2A (front-end) and5V@10mA (per module)

11 Compact size:250*127*41mm, weight~2kg

使用场景 APPLICATIONS

The NMP1K2-HEEKCC-00 is suitable for:

1 Industrial automation systems:Powering PLCs, sensors, actuators with multiple voltage needs

2 Medical equipment:Diagnostic devices, patient monitors (compliant with medical safety standards)

3 Test and measurement instruments:Precise adjustable voltages for component testing

4 Telecommunications:Routers, switches, communication modules

5 Data centers:Modular scalable power for server racks

6 Embedded systems:Customizable voltage outputs for specialized devices

注意事项 PRECAUTIONS

1 Ensure input voltage matches rated range (90~264VAC/120~370VDC) before power-on

2 Use twisted-pair cables for remote sense to minimize noise

3 Parallel operation:Connect CS pins of modules, voltage difference <0.2V, total power ≤1200W

4 Derating:Ambient temp >50°C requires current derating; output voltage <12V and temp -15~-30°C derate to90%

5 Installation:Use M4 screws (7~10Kgf-cm torque), ensure proper airflow

6 Maintenance:Disconnect power before opening case or replacing modules

7 Local ON/OFF:Open RC2 to GND for ON, short for OFF; assemble shorting connector for global ON

8 Do not exceed 240W per module or1200W total system power

NMP1K2-HEEKCC-00-PDF数据手册-参考资料