产品特点 FEATURES

1 Modular design with 6 slots for NMP1K2, supporting up to 1200W total output power

2 Complies with medical (2x MOPP between primary and secondary) and ITE safety standards

3 Wide input voltage range:90~264VAC or 120~370VDC; frequency range:47~63Hz

4 High efficiency up to 91% (typical at full load with H/K modules at nominal 24V/48V)

5 Multiple output module options: single output (5V/36A,12V/20A,24V/10A,48V/5A) and dual output (30V/5A each) modules, each up to 240W

6 Built-in protection functions: overvoltage, overload, overtemperature (shutdown and auto-recover for overtemperature, constant current limiting for overload)

7 Supports remote control: global and local ON/OFF (via RC1/RC2 pins), remote sense to compensate voltage drop up to 0.5V

8 Monitoring features: DC OK signal (TTL level indicating output status), temperature alarm signal (T-Alarm), auxiliary power outputs (5V/2A for NMP1K2,5V/10mA for modules)

9 Parallel operation capability with current sharing (CS pin connection), allowing up to 6 modules in parallel for NMP1K2

10 Compact mechanical size:250×127×41mm (L×W×H) for NMP1K2

使用场景 APPLICATIONS

1 Medical equipment (e.g., diagnostic devices, patient monitoring systems) due to compliance with medical safety standards

2 Industrial automation systems (PLCs, motor drives, sensors) requiring multiple stable DC power supplies

3 Test and measurement instruments (laboratory equipment, calibration tools) needing precise and adjustable power outputs

4 Telecommunications and data center equipment (routers, switches, servers) for reliable power distribution

5 Embedded systems and electronic device development platforms that demand flexible power configurations

6 Any application requiring high-reliability, modular DC power with remote monitoring and control functions

注意事项 PRECAUTIONS

1 Ensure the shorting connector (RC1 to GND-P) is properly installed before use to enable output

2 Follow derating guidelines: reduce output current in high ambient temperatures (refer to product derating curves for details)

3 For parallel operation: connect CS pins of modules, ensure output voltage difference <0.2V between modules, do not exceed total output power limit (1200W for NMP1K2), and avoid using PC function

4 Use appropriate wire gauge for input/output connections to minimize voltage drop and ensure safety

5 Proper grounding is essential to meet safety standards and reduce electromagnetic interference

6 Avoid electrostatic discharge (ESD) when handling modules; use anti-static measures if necessary

7 Do not operate the device beyond specified input/output ranges to prevent damage or safety hazards

8 Refer to the official function manual for detailed remote control, programming, and parallel operation instructions

NMP1K2-HE#KKE-04-PDF数据手册-参考资料