产品特点 FEATURES

1 Modular power supply with 1200W maximum output power (NMP1K2 series) and 6 slots for flexible output configuration

2 Supports multiple output module types (5V/36A,12V/20A,24V/10A,48V/5A etc.) each up to 240W

3 Complies with medical safety standards (2x MOPP between primary and secondary) and ITE standards

4 Wide input voltage range: AC90~264V, DC120~370VDC; frequency range47~63Hz

5 High power factor: >0.95 at 230VAC full load, >0.98 at115VAC full load

6 High efficiency: up to91% for H/K modules (24V/48V) at nominal voltage full load

7 Comprehensive protection: overload (constant current limiting), overvoltage (shut down and repower recover), overtemperature (auto-recover when cool)

8 Supports remote control (global/local ON/OFF), remote sense (0.5V drop compensation), voltage/current programming

9 TTL-level alarm signals: DC OK (output status) and T-Alarm (overtemperature)

10 Current sharing for parallel operation to balance load

11 Auxiliary power outputs:5V/2A (front-end) and5V/10mA (per module)

12 Compact mechanical design with specified mounting torque requirements

使用场景 APPLICATIONS

1 Medical equipment: Diagnostic devices (ultrasound), patient monitors, lab analyzers (compliant with medical standards)

2 Industrial automation: PLC systems, motor drives, sensor networks needing modular power

3 Test & measurement: Lab instruments, component testers requiring flexible voltage/current

4 Communication systems: Base stations, network switches, routers needing stable power

5 Data centers: Server racks or edge computing with scalable power needs

6 R&D labs: Prototype testing setups with custom power configurations

注意事项 PRECAUTIONS

1 Must assemble shorting connector (RC1 to GND-P) for global ON/OFF control; no output without it

2 Derating rule: When output voltage <12V and temp -15~-30°C, derate current to90% of rated value

3 Follow specified mounting torque for terminals (12Kgf-cm AC input, 10Kgf-cm DC output)

4 Remote sense: Connect +S/-S to load terminals to compensate wiring voltage drop (max0.5V)

5 Parallel operation: CS pins of modules must be connected; voltage difference <0.2V; total power ≤1200W

6 Overtemperature: Check ventilation when T-Alarm signal is high (4.5~5.5V)

7 Local ON/OFF: For NMS-240 modules, open RC2 pin to turn on, short to turn off

8 Storage: Keep in -40~+85°C temp and10~95% RH (non-condensing)

9 Avoid exceeding module or system maximum load to prevent damage

10 Refer to function manual for correct voltage/current programming wiring

NMP1K2-HCK#EH-00-PDF数据手册-参考资料