产品特点 FEATURES

1 Modular design: NMP1K2 model has 6 slots for output modules (NMS-240 single output or NMD-240 dual output), supporting flexible configuration of output voltages (5V,12V,24V,48V) and corresponding currents.

2 High power capacity: Up to 1200W total output power for NMP1K2.

3 Compliance with safety standards: Meets medical standards (2x MOPP between primary and secondary) and ITE standards (e.g., UL62368-1, EN60601-1 Ed3.1).

4 Multiple protection functions: Overload protection (constant current limiting or shutdown), overvoltage protection (shutdown and re-power to recover), overtemperature protection (shutdown and auto-recover after cooling).

5 Flexible control options: Global or local ON/OFF control via RC pins; remote sense function to compensate load wiring voltage drop; output voltage/current programming via PV/PC pins; DC OK signal for output status indication; current sharing for parallel module operation.

6 Wide input range: 90~264VAC or 120~370VDC input, 47~63Hz frequency range.

7 High efficiency: Up to 91% typical efficiency at full load with H/K modules (24V/48V).

8 Low leakage current: <400uA at 264VAC, touch current <100uA at 264VAC

使用场景 APPLICATIONS

1 Industrial automation: Powering PLCs, sensors, actuators, and control panels requiring multiple stable DC voltages.

2 Medical equipment: Suitable for patient monitors, diagnostic instruments, and lab devices (complying with medical safety standards).

3 Test and measurement: Providing precise, adjustable DC power for electronic component testing and prototype development.

4 Communication infrastructure: Supporting routers, switches, and telecom equipment with reliable modular power.

5 Data centers: Powering server racks or network devices with flexible voltage requirements.

6 Research laboratories: Used in experimental setups needing customizable DC outputs and stable performance

注意事项 PRECAUTIONS

1 Installation: Use recommended mounting screws (M4 for front-end, M3.5 for output terminals) with specified torque (12Kgf-cm for AC terminal,10Kgf-cm for output terminals); ensure proper grounding.

2 Operation environment: Work within -30~+70°C ambient temperature; derate output current when temp exceeds 50°C (refer to derating curve); avoid condensation (20~90% RH non-condensing).

3 Control functions: For global ON/OFF, assemble the shorting connector if not using external control; local ON/OFF requires correct pin connections (open for ON, short for OFF for RC2/RC3 pins).

4 Parallel operation: Connect CS pins of modules; ensure output voltage difference <0.2V; total output current/power within limits (sum of module rated currents, max1200W for NMP1K2).

5 Remote sense: Use +S/-S pins to compensate voltage drop (up to0.5V) on load wiring.

6 Programming: Follow recommended external voltage ranges for PV/PC pins (reference to GND pins).

7 Maintenance: Monitor T-Alarm signal for overheating; keep unit clean for proper airflow

NMP1K2-HCEKEK-00-PDF数据手册-参考资料