产品特点 FEATURES

1 Modular design: 6 slots for NMS-240 (single output) or NMD-240 (dual output) modules

2 High power capacity: 1200W maximum for NMP1K2

3 Wide input range: 90~264VAC /120~370VDC, supporting both AC and DC inputs

4 Safety compliance: Meets ANSI/AAMI ES60601-1 Ed.3.1, UL62368-1, TUV EN60601-1 Ed.3.1, EN62368-1, IEC60601-1 Ed.3.1, IEC62368-1, TUV IEC60950-1, EAC TP TC004 standards

5 Comprehensive protection: Overload (O.L.P), Over Voltage (O.V.P), Over Temperature (O.T.P), Short Circuit (O.C.P) with auto-recovery or re-power on recovery

6 Advanced control functions: Global/local ON/OFF, remote sense, voltage programming (PV), current programming (PC), DC OK signal, current sharing (CS) for parallel operation

7 Auxiliary power outputs: 5V/2A (front-end) and 5V/10mA (module-level)

8 High efficiency: Up to 91% at full load with H/K modules (24V/48V)

9 Compact size: 250×127×41mm (L×W×H) for easy integration into tight spaces

使用场景 APPLICATIONS

1 Industrial automation: Powering PLCs, sensors, actuators, and control systems

2 Medical equipment: Suitable for patient monitors, diagnostic tools, and other devices requiring medical safety compliance (2x MOPP)

3 Telecommunications: Supporting network switches, routers, and base station equipment

4 Test and measurement: Providing stable, adjustable power for lab instruments and testing setups

5 Data centers: Modular power solutions for server racks and storage systems

6 LED lighting: High-power, reliable supply for industrial LED arrays and outdoor lighting

7 Renewable energy: Integration with solar/wind converters (wide DC input range)

注意事项 PRECAUTIONS

1 Installation: Ensure proper grounding via FG terminal. Use recommended screws (M4 for front-end, M3.5 for output terminals) with specified torque (12Kgf-cm for front-end mounting,10Kgf-cm for output terminals) to prevent loose connections

2 Operation: Do not exceed the maximum total power (1200W for NMP1K2). For parallel operation, connect CS pins of modules, ensure output voltage difference <0.2V between modules, and total current does not exceed rated per module × number of modules

3 Environmental: Operate within -30~+70℃ temperature range; derate output current as per derating curves (e.g.,90% rated current for Vo<12V at -15~-30℃). Avoid condensation (20~90% RH non-condensing)

4 Safety: Disconnect AC/DC input before maintenance. Do not touch live parts when powered on. Use modules compliant with application safety requirements (e.g., medical modules for patient-contact devices)

5 Troubleshooting: If no output, check if the shorting connector (RC1 to GND-P) is installed. For over-temperature alarm (T-Alarm signal high), ensure proper ventilation and check for blockages in air flow paths

NMP1K2-HCEHKH-00-PDF数据手册-参考资料