产品特点 FEATURES

1 Modular design: NMP1K2 model supports up to 6 slots, total power up to 1200W; compatible with single-output (NMS-240) and dual-output (NMD-240) modules.

2 Multiple output options: Each module offers adjustable DC voltages (5V/12V/24V/48V etc.) with rated power up to 240W per module.

3 Rich control functions: Supports remote ON/OFF (global/local), remote sense for voltage drop compensation, output voltage/current programming (PV/PC), DC OK signal for status monitoring, and T-Alarm for over-temperature warning.

4 Parallel operation capability: Enables current sharing via CS pin connection, up to 6 modules in parallel for NMP1K2.

5 Wide input range: Accepts 90-264VAC or 120-370VDC input, suitable for global use.

6 High efficiency: Up to 91% efficiency at full load (for H/K modules at 24V/48V nominal voltage), reducing energy loss.

7 Comprehensive protection: Equipped with overload (OCP), overvoltage (OVP), overtemperature (OTP) protection.

8 Safety compliance: Meets IEC 60601-1 (medical), UL62368-1 (ITE) standards, ensuring reliable use.

使用场景 APPLICATIONS

1 Industrial automation: Power supply for PLCs, sensors, actuators, and control systems requiring multiple stable DC outputs.

2 Medical equipment: Suitable for diagnostic instruments, monitoring devices complying with medical safety standards.

3 Telecommunication systems: Power for routers, switches, base stations needing diverse voltage levels.

4 Test and measurement labs: Used in test benches for powering electronic components with adjustable voltage/current requirements.

5 Data centers: Modular power solution for server peripherals, storage devices, and network equipment.

6 Other scenarios: Any application needing flexible, high-power DC power with multiple output configurations.

注意事项 PRECAUTIONS

1 Installation: Follow recommended mounting torque (7-10 Kgf-cm for M4 screws), maintain sufficient airflow to prevent overheating.

2 Electrical safety: Use appropriate wire gauges; ensure correct grounding (FG terminal) to avoid electric shock or damage.

3 Operational limits: Do not exceed total rated power (1200W for NMP1K2) or per-module limits; follow derating curves for high temperatures (reduce output current at temps above 50°C).

4 Remote control setup: For global ON/OFF, install the shorting connector (RC1 to GND-P); for local control, use open (ON) or short (OFF) for RC2/RC3 pins.

5 Parallel operation: Ensure output voltage difference <0.2V between modules; connect CS pins for current sharing; do not exceed 6 parallel modules for NMP1K2.

6 Maintenance: Regularly check for dust, loose connections, abnormal temps; avoid moisture, corrosive gases, extreme vibrations.

7 Safety compliance: Follow local electrical codes; do not disassemble without professional guidance.

NMP1K2-HCEEHE-00-PDF数据手册-参考资料