产品特点 FEATURES

Modular power supply (NMP1K2 model) with 6 slots, supporting up to 1200W total output power for flexible power configuration.

1 Compliance with strict safety standards: ANSI/AAMI ES60601-1 (Ed.3.1, medical grade with 2x MOPP isolation), UL62368-1, IEC60601-1, IEC62368-1, ensuring safe use in medical and industrial applications.

2 Wide input voltage range: AC 90~264V or DC120~370V, adapting to global power grid conditions.

3 High energy efficiency: Up to 91% at full load (when using H/K modules at nominal 24V/48V), minimizing energy loss and heat generation.

4 Comprehensive protection mechanisms: Overvoltage Protection (OVP), Overcurrent Protection (OCP), Overtemperature Protection (OTP), Overload Protection (OLP), and short-circuit protection, safeguarding both the power supply and connected devices.

5 Rich functional extensions: Remote sense (compensates voltage drop up to 0.5V), current sharing (for parallel operation), output voltage/current programming, global/local ON/OFF control, DC OK signal (output status indication), and overtemperature alarm (T-Alarm).

6 Auxiliary power output: 5V/2A for NMP1K2 to support external control circuits.

使用场景 APPLICATIONS

Medical equipment (patient monitors, diagnostic instruments, medical imaging systems with medical safety compliance)

1 Industrial automation (PLCs, servo drives, sensors, control panels in factory lines)

2 Test and measurement (lab equipment like oscilloscopes, signal generators needing multiple voltage configurations)

3 Communication systems (routers, switches, base stations in telecom networks)

4 Data centers (server racks, storage arrays requiring high-power parallel operation)

5 Laboratory research (experimental setups with flexible voltage/current requirements)

注意事项 PRECAUTIONS

Installation: Follow mounting specs (M4 screws, torque 7~10 Kgf-cm; maintain airflow direction for heat dissipation)

1 Derating: When output voltage <12V and ambient temp -15°C~-30°C, derate current to 90% of rated value; refer to derating curves for high temp/load conditions

2 Parallel operation: Connect CS pins of modules; ensure voltage difference <0.2V; do not exceed total power (1200W) or slot count (6)

3 Global ON/OFF: Assemble shorting connector (RC1 to GND-P) if not using global control

4 Remote sense: Correctly wire +S/-S to load terminals

5 Safety: Proper grounding; avoid dust/moisture/corrosive environments; do not exceed input/output ratings

NMP1K2-H#EEKC-03-PDF数据手册-参考资料