1 Modular power supply with 6 slots, supporting up to 1200W total output power (NMP1K2 model)

2 Compatible with NMS-240 series single-output modules (5V/36A,12V/20A,24V/10A,48V/5A) and NMD-240 dual-output modules, each up to 240W

3 Wide input voltage range:90~264VAC or120~370VDC, suitable for global use

4 High efficiency up to91% (typical at full load with24V/48V modules)

5 Supports global ON/OFF control (via RC1 pin) and local module ON/OFF control (via RC2/RC3 pins)

6 Remote sense function (+S/-S pins) compensates voltage drop on load wiring up to0.5V

7 Output voltage programming (PV pin) and current programming (PC pin) for flexible adjustment

8 DC OK signal (TTL level) indicates module output status; T-Alarm signal alerts over-temperature

9 Current sharing (CS pin) for parallel operation to balance output current

10 Auxiliary power outputs:+5V-AUX_P (2A for NMP1K2) and+5V Vcc2 (10mA for modules)

11 Complies with EN60601-1 (medical), EN62368-1 (ITE) and EAC TP TC004 safety standards

12 Low leakage current (<400uA at264VAC) and inrush current protection

1 Industrial automation: Provides stable multi-voltage DC power for PLCs, sensors, motors and actuators

2 Medical equipment: Suitable for devices requiring medical isolation (2x MOPP) like patient monitors

3 Telecommunication systems: Parallel operation supports high-power needs for base stations

4 Test and measurement: Programmable features enable flexible testing of electronic components

5 Data centers: Modular design allows easy maintenance and expansion for servers

6 LED lighting: Stable DC output with remote control for large-scale installations

7 Laboratory equipment: Reliable power source for precision instruments requiring adjustable voltage/current

1 Ensure shorting connector (RC1 to GND-P) is installed; otherwise unit has no output

2 Twist +S/-S lines for remote sense to minimize interference

3 Parallel operation: Connect CS pins; voltage difference between modules <0.2V; total power ≤1200W

4 Derating: When output voltage <12V and ambient temp -15°C~-30°C, reduce current to90% of rated

5 Over-temperature: If T-Alarm is high (4.5~5.5V), check cooling and reduce load

6 Local ON/OFF: For NMS-240, open RC2 to turn on; for NMD-240 open RC2/RC3 to turn on V1/V2

7 Follow mounting torque (12Kgf-cm for AC terminals,10Kgf-cm for DC terminals)

8 Do not exceed maximum rated power/current for modules or total unit

9 Do not use PC function in parallel operation

NMP1K2-EKKKCC-03-PDF数据手册-参考资料