产品特点 FEATURES

1 Modular design: NMP1K2 model supports up to 6 slots, each compatible with NMS-240 output modules (max 240W per module, total 1200W output).

2 Multiple output configurations: Available modules include 5V@36A (180W),12V@20A (240W),24V@10A (240W),48V@5A (240W), with adjustable voltage ranges (e.g.,5V:3-6V,12V:6-15V,24V:15-30V,48V:30-55V).

3 High safety compliance: Meets medical standards (2x MOPP isolation between primary and secondary) and ITE standards (ANSI/AAMI ES60601-1, UL62368-1, TUV EN60601-1, IEC62368-1 etc.).

4 Comprehensive protection: Overload (constant current limiting), overvoltage (shut down output, recover via re-power), overtemperature (auto-recover after cooling), earth leakage current <400uA/264VAC.

5 Advanced functional support: Remote sense (compensate up to 0.5V line drop), current sharing (for parallel module operation), DC OK signal (TTL level indicating output status), global/local remote ON/OFF control, output voltage/current programming (via PV/PC pins).

6 High efficiency & power factor: Up to91% efficiency at full load (with H/K modules at24V/48V), PF>0.95@230VAC full load.

7 Wide input range:90-264VAC or120-370VDC,47-63Hz frequency range, adapting to various power grids.

8 Stable performance: Low ripple noise (max100-250mVp-p depending on module), tight voltage regulation (line/load regulation as low as ±0.2%).

使用场景 APPLICATIONS

1 Medical equipment: Diagnostic devices (ultrasound, blood analyzers), patient monitors (complies with medical safety standards).

2 Industrial automation: PLC systems, DCS controllers, industrial control panels (modular design fits flexible power needs).

3 Test & measurement: Oscilloscopes, signal generators (precise voltage/current control supports accurate testing).

4 Telecommunications: Base stations, network switches (reliable parallel operation and high efficiency meet 24/7 demands).

5 Laboratory R&D: Electronic device testing setups (modular output combinations support diverse experiment requirements).

6 Broadcast systems: Video cameras, editing consoles (low ripple noise ensures stable signal quality).

注意事项 PRECAUTIONS

1 Installation precautions: Use recommended screws (M4 for front-end, M3.5 for output terminals) with specified torque (12Kgf-cm for AC terminal,10Kgf-cm for DC output); ensure proper grounding.

2 Operation guidelines:

3 Global ON/OFF: Assemble the shorting connector (RC1 to GND-P) if not using global control; otherwise, no output.

4 Parallel operation: Connect CS pins of modules; ensure output voltage difference <0.2V; total load ≤1200W; avoid PC function in parallel.

5 Derating rules: For output voltage <12V and ambient temp -15~-30°C, derate current to90% of rated; follow derating curves for temp/voltage.

6 Remote sense: Use twisted pairs for sense lines; compensate up to0.5V drop only.

7 Maintenance & safety: Disconnect AC power before wiring/maintenance; avoid moisture/dust exposure; monitor temp via T-Alarm signal; do not exceed maximum ratings.

NMP1K2-EHH#KC-02-PDF数据手册-参考资料