1 Modular power supply with 6 slots, supporting up to 1200W total output

2 Wide input voltage range: 90~264VAC / 120~370VDC

3 High efficiency up to 91% (for H/K modules at nominal 24V/48V full load)

4 Complies with medical (2x MOPP) and ITE safety standards

5 Multiple protection functions: Overload, overvoltage, overtemperature, short circuit

6 Remote control capabilities: Global/local ON/OFF, remote sense, voltage/current programming

7 Current sharing for parallel operation of NMS-240 modules

8 DC OK signal (output status) and T-Alarm signal (overtemperature alert)

9 Auxiliary power outputs: 5V/2A (front-end) and 5V/10mA (module-level)

10 Supports TTL-level signals for system monitoring

1 Medical equipment (diagnostic devices, patient monitors) with medical safety compliance

2 Industrial automation systems (PLCs, motor drives, control panels)

3 Test and measurement instruments requiring adjustable power outputs

4 Telecom and data communication equipment (routers, switches)

5 Laboratory setups for precise power control experiments

6 Data center edge devices and server racks

7 Industrial IoT (IIoT) systems needing flexible power distribution

1 Derate output current to 90% when voltage <12V and ambient temp is -15~-30℃

2 Install the shorting connector (RC1 to GND-P) for normal global ON/OFF operation

3 Use twisted-pair cables for remote sense lines (+S/-S) to reduce interference

4 For parallel NMS-240 modules: Connect CS pins, ensure voltage difference <0.2V

5 Do not use output current programming (PC) function in parallel mode

6 Remote control must turn all parallel modules ON/OFF simultaneously

7 Overtemperature protection triggers shutdown; recover by power cycling after cooling

8 Follow derating curves for high ambient temperatures

9 Use short, large-diameter wiring for parallel connections to balance current

NMP1K2-EHEKKK-05-PDF数据手册-参考资料