产品特点 FEATURES

1 Modular power supply with 6 slots, supporting up to 1200W total output (NMP1K2 series)

2 Compatible with NMS-240 single-output modules (12V/E,24V/H,48V/K, etc.) with adjustable voltage ranges (e.g.,12V:6-15V,24V:15-30V,48V:30-55V)

3 High efficiency up to 91% (for H/K modules at nominal 24V/48V full load)

4 Wide input range:90-264VAC or120-370VDC, frequency 47-63Hz

5 Safety compliance: Meets medical standards (2x MOPP between primary and secondary) and ITE standards (ANSI/AAMI ES60601-1 Ed3.1, UL62368-1, TUV EN60601-1, etc.)

6 Rich functionalities: Remote on/off control (global/local), remote sense (+S/-S), output voltage programming (PV), output current programming (PC), DC OK signal (TTL level), over-temperature alarm (T-Alarm), current sharing for parallel operation

7 Protection mechanisms: Overload (constant current limiting), overvoltage (shut down and recover on repower), over-temperature (auto recover after cooling)

8 Compact mechanical design with specified mounting requirements (M4 screws with torque 7-10 Kgf-cm)

使用场景 APPLICATIONS

1 Medical equipment: Diagnostic devices, patient monitors, laboratory instruments (compliant with medical safety standards)

2 Industrial automation: PLC systems, robotic control units, factory automation equipment (fits diverse power needs)

3 Test and measurement: Lab setups requiring multiple adjustable DC voltage outputs

4 Telecommunications: Network racks, communication equipment needing stable modular power

5 Data centers: Server accessories or network devices with varying voltage requirements

6 Research facilities: Experimental setups demanding reliable and programmable power sources

注意事项 PRECAUTIONS

1 Installation: Use M4 screws with torque 7-10 Kgf-cm; follow specified air flow direction

2 Module usage: Only install compatible NMS-240 modules (check model codes like E for12V, H for24V, K for48V)

3 Temperature derating: When ambient temp is -15°C to -30°C and output voltage <12V, derate output current to90% of rated; refer to derating curves for other conditions

4 ON/OFF control: Assemble shorting connector (RC1 to GND-P) if global ON/OFF is not used; local control uses RC2/RC3 pins (open=ON, short=OFF)

5 Parallel operation: Connect CS pins of modules together; ensure output voltage difference <0.2V; total load ≤1200W; use short large-diameter wires

6 Remote sense: Use +S/-S pins to compensate voltage drop on load wiring (max 0.5V)

7 Programming: PV adjusts voltage within specified ranges; PC adjusts current to40-100% of rated value

8 Safety: Do not exceed max output power; disconnect power before maintenance

9 Alarm monitoring: Track T-Alarm (high=over temp) and DC OK (high=module ON) signals

NMP1K2-EHEKEE-00-PDF数据手册-参考资料