产品特点 FEATURES

1 Modular design: NMP1K2 model supports up to 6 slots with total output power up to 1200W, compatible with NMS-240 (single output) and NMD-240 (dual output) modules

2 Wide input range: AC 90~264V or DC 120~370VDC, frequency range 47~63Hz

3 High safety compliance: Meets ANSI/AAMI ES60601-1, UL62368-1, TUV EN60601-1, EN62368-1, IEC60601-1, IEC62368-1 standards; 2x MOPP isolation between primary and secondary

4 High efficiency: Up to 91% at full load for H/K modules (24V/48V nominal voltage)

5 Rich protection functions: Overload (constant current limiting), overvoltage (shut down and recover on re-power), overtemperature (shut down and auto-recover after cooling)

6 Flexible control: Global/local ON/OFF, remote sense (compensates up to 0.5V voltage drop), output voltage/current programming (PV/PC pins), DC OK signal (TTL level for output status), current sharing (parallel operation)

7 Auxiliary power: Front-end provides 5V/2A (NMP1K2); modules provide 5V/10mA

8 Mechanical specs: NMP1K2 dimensions 250×127×41mm (L×W×H), AC input terminal mounting torque up to 12Kgf-cm

使用场景 APPLICATIONS

1 Industrial automation: Stable power for PLCs, sensors, actuators

2 Medical devices: Compliant with medical safety standards for diagnostic/monitoring equipment

3 Test and measurement: Adjustable output and precise control for lab testing systems

4 Communication infrastructure: Parallel operation supports high-power needs in base stations/network gear

5 Electronic manufacturing: Powers prototype/test boards in production lines

6 Professional equipment: Broadcast gear, industrial control systems requiring modular power solutions

注意事项 PRECAUTIONS

1 Installation: Ensure proper grounding; use M4 screws with 7~10 Kgf-cm torque for mounting

2 Operation:

3 For output <12V and ambient temp -15°C~-30°C, derate current to 90% of rated value

4 Assemble shorting connector (RC1 to GND-P) for global ON/OFF control to enable output

5 Parallel operation: Connect CS pins, keep output voltage difference <0.2V; total power ≤1200W

6 Maintenance: Keep in well-ventilated area; avoid dust/moisture/corrosive substances

7 Safety: Disconnect power before maintenance; do not exceed rated parameters to prevent damage

NMP1K2-EHCHKK-00-PDF数据手册-参考资料