产品特点 FEATURES

Modular power supply from MW (Meanwell), model NMP1K2-EHCCCE-00, part of NMP series with max 1200W output and 6 slots for modules

1 Input voltage range:90~264VAC /120~370VDC; frequency range:47~63Hz; power factor >0.95 (230VAC full load)

2 Supports single output modules (NMS-240:5V/36A,12V/20A,24V/10A,48V/5A, max240W each) and dual output modules (NMD-240:30V/5A each, combined max240W)

3 Complies with multiple safety standards:ANSI/AAMI ES60601-1 Ed3.1, UL62368-1, TUV EN60601-1 Ed3.1, EN62368-1, IEC60601-1 Ed3.1, IEC62368-1, TUV IEC60950-1, EAC TP TC004

4 Protection features:Overload (constant current limiting), overvoltage (shutdown, repower to recover), overtemperature (shutdown, auto recover after cooling)

5 Control functions:Global/local ON/OFF, remote sense (compensates up to0.5V drop), voltage/current programming (PV/PC), DC OK signal (TTL level), current sharing (CS for parallel)

6 Auxiliary power outputs:+5V-AUX_P (2A for NMP1K2), Vcc2 (5V/10mA for NMS-240)

7 Mechanical specs:Dimensions 250*127*41mm; M4 screws with 7-10 Kgf-cm mounting torque

8 Efficiency up to91% (full load with H/K modules at24V/48V); derating curves available for temp/voltage variations

使用场景 APPLICATIONS

1 Industrial automation:Powering PLCs, DCS, servo drives and control components requiring multiple voltages

2 Medical equipment:Suitable for devices complying with medical safety standards (2x MOPP isolation)

3 Test and measurement:Precision instruments needing stable, adjustable voltage/current outputs

4 Telecommunications:Base stations, routers and switches with modular power needs

5 Data centers:Auxiliary power for server management modules or peripherals

6 Industrial control panels:Power for sensors, actuators and display units

7 Precision electronics:Lab equipment, semiconductor testing tools with multiple voltage rails

8 Parallel setups:Applications needing higher current via parallel module connection

注意事项 PRECAUTIONS

1 Installation:Use M4 screws with7-10 Kgf-cm torque; max penetration depth4mm for NMP1K2

2 Global control:Install shorting connector (RC1 to GND-P) if not using external ON/OFF control

3 Parallel operation:Connect CS pins mutually; output voltage difference <0.2V; max6 slots for NMP1K2

4 Derating:Derate to90% rated current when temp < -15°C and output voltage <12V

5 Remote sense:Use twisted pairs for +S/-S lines to reduce interference

6 Connectors:Use compatible HRS DF11 series connectors for CN32/CN81 terminals

7 Overtemperature:Check ventilation if T-Alarm goes high; system recovers after cooling

8 Programming:Follow PV/PC guidelines (referenced to GND) to avoid over-adjustment

9 Ventilation:Ensure proper air flow as per mechanical specs

10 Safety:Disconnect input power before module installation/wiring changes

NMP1K2-EHCCCE-00-PDF数据手册-参考资料