产品特点 FEATURES

Modular design with 6 slots, supporting up to 1200W total power (NMP1K2 model)

Wide input voltage range:90~264VAC /120~370VDC, suitable for global use

High efficiency:Up to91% at full load (for 24V/48V modules)

Compliance with multiple safety standards:ANSI/AAMI ES60601-1, UL62368-1, TUV EN60601-1, EN62368-1, IEC60601-1, IEC62368-1, EAC TP TC004

Rich protection functions:Overload (constant current limiting), Overvoltage (shut down, re-power to recover), Over-temperature (shut down, auto recover when cool)

Flexible control options:Global/local ON/OFF, remote sense (compensates up to0.5V voltage drop), output voltage/current programming (PV/PC pins), DC OK signal (TTL level for output status)

Current sharing capability:Supports parallel operation of up to6 modules (NMP1K2), ensuring balanced current distribution

Auxiliary power outputs:5V/2A (main unit) and5V/10mA per module for control circuits

使用场景 APPLICATIONS

Medical equipment:Diagnostic devices, patient monitors, and other medical devices requiring reliable power (compliant with medical safety standards)

Industrial automation:PLC systems, control panels, motor drives, and industrial sensors

Test and measurement instruments:Oscilloscopes, power analyzers, and lab equipment

Communication systems:Routers, switches, base stations, and network devices

Other applications:Modular power systems needing multiple output voltages and flexible configuration

注意事项 PRECAUTIONS

Global ON/OFF control:Ensure the shorting connector (RC1 to GND-P) is installed if not using external control; otherwise, no output will be present

Remote sense:Connect +S/-S pins to load terminals to compensate for voltage drop (max0.5V)

Parallel operation:

1 Connect CS pins of all modules; output voltage difference between modules should be <0.2V

2 Total power must not exceed1200W for NMP1K2; use short/large diameter wiring

3 Remote control must turn all modules on/off simultaneously; avoid using PC function in parallel

Derating:When output voltage <12V and ambient temp is-15°C~-30°C, derate output current to90% of rated

Terminal torque:Follow specified torque values (10Kgf-cm for DC output,12Kgf-cm for AC input) to prevent loose connections

Over-temperature protection:If triggered, wait for the unit to cool down before re-powering to avoid damage

NMP1K2-EEKKKK-12-PDF数据手册-参考资料