产品特点 FEATURES

1 Modular design with 6 slots (NMP1K2) supporting up to 6 NMS-240 (single output) or NMD-240 (dual output) modules, each up to 240W

2 Wide input range: 90~264VAC or 120~370VDC, 47~63Hz

3 High efficiency: Up to 91% (for H/K modules at 24V/48V full load)

4 Compliance with medical (2x MOPP) and ITE safety standards (IEC60601-1, UL62368-1)

5 Multiple protection functions: Over-temperature (auto-recover), over-voltage (shutdown/re-power recover), over-load (constant current limiting), short circuit (hiccup/constant current)

6 Remote control capabilities: Global/local ON/OFF, remote sense (compensates up to 0.5V drop), voltage/current programming (PV/PC pins), DC OK signal (TTL level), T-Alarm (over-temperature alert)

7 Current sharing support for parallel operation of NMS-240 modules

8 Auxiliary power outputs: 5V/2A (front-end),5V/10mA per NMS-240 module

9 Compact dimensions:250x127x41mm, weight ~2kg

10 Easy mounting with M4 screws (torque:7~10 Kgf-cm)

使用场景 APPLICATIONS

1 Medical equipment: Patient monitors, diagnostic devices, lab instruments (medical safety compliant)

2 Industrial automation: PLCs, DCS systems, robotics, sensors needing multiple stable DC outputs

3 Test and measurement: Lab setups requiring adjustable voltage/current and reliable power

4 Telecommunications: Network routers, switches with modular power needs

5 LED lighting: Systems needing multiple voltage outputs for different panels

6 Broadcast: Studio cameras, mixers requiring clean, stable power

注意事项 PRECAUTIONS

1 Installation: Ensure proper grounding (FG pin connected). Use recommended M4 screws with torque 7~10 Kgf-cm

2 Input handling: Do not exceed input voltage range (90~264VAC/120~370VDC)

3 Module operation: For NMD-240 modules, use RC2/RC3 pins correctly for local ON/OFF

4 Parallel NMS-240 modules: Connect CS pins for balance, voltage difference <0.2V, total power ≤1200W

5 Temperature: Derate to90% current (modules <12V) if ambient temp < -15°C; ensure proper airflow

6 Protection: Do not bypass protections; wait for cooling after over-temperature shutdown

7 Wiring: Use short/large wires for parallel connections; twist +S/-S lines for remote sense

8 Accessories: Install shorting connector (RC1 to GND-P) if global ON/OFF not used

NMP1K2-EEHEHC-01-PDF数据手册-参考资料