产品特点 FEATURES

1 Modular design with 6 slots (NMP1K2 model), supporting up to 1200W total output power

2 Multiple output module options: single output (5V/36A,12V/20A,24V/10A,48V/5A) and dual output (30V/5A each, combined max 240W)

3 Wide input voltage range:90~264VAC or120~370VDC

4 High power factor:PF>0.95 at230VAC full load, PF>0.98 at115VAC full load

5 High efficiency:up to91% (full load with H/K modules at 24V/48V nominal voltage)

6 Compliant with safety standards:ANSI/AAMI ES60601-1 Ed.3.1, UL62368-1, TUV EN60601-1 Ed.3.1, EN62368-1, IEC60601-1 Ed.3.1, IEC62368-1

7 Comprehensive protection functions:overload (constant current limiting), overvoltage (shut down and recover on re-power), overtemperature (shut down and auto-recover when temp drops)

8 Flexible control functions:global/local ON/OFF control, remote voltage programming (PV), remote current programming (PC), remote sense (+S/-S)

9 Current sharing capability for parallel operation of modules to balance output current

10 Status signals:DC OK (TTL level indicating module output status), temperature alarm (TTL level for over-temperature)

11 Auxiliary power outputs:5V/2A (front-end),5V/10mA (per module)

使用场景 APPLICATIONS

1 Medical equipment:diagnostic devices, patient monitors, laboratory instruments

2 Industrial automation:PLC systems, industrial control panels, servo drives

3 Test and measurement:electronic test equipment, signal generators, oscilloscopes

4 Telecom and data communication:rack-mounted devices, network switches, routers

5 Other applications requiring flexible, reliable multi-output power supply with high safety and efficiency

注意事项 PRECAUTIONS

1 Ensure proper mounting:use M4 screws with torque7~10 Kgf-cm, max penetration depth4mm for front-end

2 Global ON/OFF control:assemble the shorting connector (RC1 to GND-P) if not using external control

3 Remote sense:connect +S/-S to load terminals to compensate for wiring voltage drop

4 Parallel operation:connect CS pins of modules together, ensure output voltage difference <0.2V between modules, total power ≤1200W

5 Derating:reduce output current to90% of rated value when output voltage <12V and ambient temp is -15~-30°C

6 Safety compliance:follow local electrical regulations, ensure proper grounding

7 Do not exceed rated current/power of individual modules or total system

NMP1K2-EEEEKE-03-PDF数据手册-参考资料