产品特点 FEATURES

Modular power supply with 1200W maximum output (NMP1K2 model) and 6 slots for flexible configuration of output modules (supports 5V,12V,24V,48V etc.)

Complies with medical safety standards (2x MOPP isolation between primary and secondary) and ITE standards (EN60601-1, EN62368-1 etc.)

Wide input voltage range: AC 90-264V or DC120-370V, suitable for global use

High efficiency up to 91% (for H/K modules at 24V/48V full load), reducing energy loss

Multiple protection functions: Overload (OLP), Over Voltage (OVP), Over Temperature (OTP), Short Circuit (SCP)

Rich functional options: Remote sense (compensates voltage drop), remote ON/OFF control (global/local), DC OK signal (indicates output status), current sharing (for parallel operation), voltage/current programming (PV/PC)

Auxiliary power output: Front-end provides 5V/2A, each module provides 5V/10mA

EMC compliant: Meets EN55032 Class B (emission) and EN61000-4 series (immunity) standards

Compact mechanical design with specified mounting torque and airflow direction for reliable operation.

使用场景 APPLICATIONS

Medical equipment: Diagnostic instruments, patient monitors, laboratory analysis devices (complying with medical safety standards)

Industrial automation: PLC systems, industrial robots, control panels requiring multiple voltage outputs

Test and measurement: Lab equipment, oscilloscopes, power testing devices

Communication systems: Telecom base stations, data communication equipment

Broadcast and media: Audio/video production gear, signal transmitters

Embedded systems: Customized electronic devices needing flexible power configurations.

注意事项 PRECAUTIONS

Mounting: Use M4 screws with torque 7-10 Kgf-cm, ensure maximum penetration depth as specified to avoid damage

Thermal management: Follow derating curves—for output voltage <12V at -15~-30°C, derate output current to 90% of rated value; ensure proper airflow direction for cooling

Parallel operation: Connect CS pins of modules, keep output voltage difference <0.2V; max 6 modules for NMP1K2, total power ≤1200W

Remote control: Global ON/OFF requires shorting RC1 to GND-P (use provided shorting connector); local ON/OFF via RC2 (open=ON, short=OFF)

Wiring: Use appropriate wire gauge (20-26AWG for control pins) and ensure secure grounding

Safety: Do not operate without the required shorting connector for global ON/OFF function.

NMP1K2-EEEEEK-08-PDF数据手册-参考资料